Marching Drum Carrier
Owner's Manual
6
Adjusting the Carrier
By adjusting the arms, the mounting position of the
instrument can be changed.
1
Adjust the height of the arms and the spread angles.
2
Tighten the bolts of the arm holders with a tuning key.
NOTICE
Always tighten the bolts with the arms passing
through the arm holders. Otherwise, the holders
might be deformed.
When you remove an instrument from the carrier to
put the carrier away or to move it to other places, the
arms can be folded for safe transport.
To mark the arm holder positions tighten the bolts of
the position-memory holders.
3
Place the position-memory holders on top of the arm
holders tightened in step
2
.
4
Use a tuning key to tighten the bolts of the position-
memory holders.
NOTICE
Always tighten the bolts with the arms passing
through the arm holders. Otherwise, the holders
might be deformed.
By adjusting the belly plate, the height can be
changed to suit your stature.
1
Adjust the height of the belly plate.
2
Use a tuning key to tighten the four bolts.
Arms
Belly plate
Arm holder
Arm
Bolt
Position-memory holder
Arm holder
tightened in step
2
.
Bolt
Folded
Both bolts of the arm holders are loosened.
Reset
Refix the arm holders at marked positions with
position-memory holders.
Loose
Loose
Belly
plate
Bolt
Plain washer
