Marching Drum Carrier
Owner's Manual
7
Adjusting the Carrier
When the height is not sufficient, change the arm
attachment positions on the belly plate. The height
can be adjusted in four levels.
1
Adjust the height of arm position.
2
Use the supplied hexagonal wrench to tighten the
two bolts. Fix the arm holders to the belly plate.
For more comfortable playing posture, the shoulder rests can be adjusted.
The belt helps to stabilize instrument while play-
ing. Pull on both ends to fasten the belt.
Do not engage in any operation other than
playing instrument while wearing the car-
rier. This can cause loss of balance and
result in injury.
Adjusting the arm position
Shoulder rests
Belt
Belly plate
Bolts
Hexagonal
wrench
Arm holder
Arm
Adjusting the width
Adjusting the angles
When set to the most forward:
When set to the most rearward:
Tuning key
Touch fastener
Belt
