18
En
When you press
OPTION
, the option menu will appear in the front panel display, allowing you to make the following settings.
(eject button) cannot be operated while the option menu is displayed.
* Default setting
Procedure for settings
USEFUL FUNCTIONS
Using the Option menu
Option menu
Setting or range
See page
PRESET DELETE
Deletes a stored preset (shown only if the audio source is DAB/FM).
DAB INIT SCAN
Performs the initial scan (shown only if the audio source is DAB).
DAB TUNE AID
Checks the signal strength of DAB station (shown only if the audio source is DAB).
DIMMER
Adjusts the brightness of the front panel display (
1
*
: bright,
2
: medium,
3
: dim).
–
EQ LOW
Adjusts the tonal character (low frequencies) (
–10
-
0
*
-
+10
dB).
–
EQ MID
Adjusts the tonal character (mid frequencies) (
–10
-
0
*
-
+10
dB).
–
EQ HIGH
Adjusts the tonal character (high frequencies) (
–10
-
0
*
-
+10
dB).
–
BALANCE
Adjusts the volume balance of the left and right speakers (
L+10
-
CENTER
*
-
R+10
).
–
POWER SAVING
Switches the standby state, NORMAL or ECO (power saving mode)
AUTO PWR
STDBY
You can specify the time after which the unit will turn off (standby) automatically.
If no operation occurs for the duration you specify, the unit will turn off (standby) automatically
(
TIME 12H
: 12 hours,
TIME 8H
*
: 8 hours,
TIME 4H
: 4 hours,
TIME 2H
: 2 hours,
OFF
: the unit
will not turn off (standby)).
–
CLOCK SET
Sets the date and time.
ALARM SET
Sets the alarm.
BLUETOOTH
Connects this unit and your component via
Bluetooth
(
ON
*
: enable,
OFF
: disable).
1
Press
OPTION
.
The option menu will appear.
2
Press
/
to select the menu item that you
want to set, and then press
ENTER
.
3
Press
/
to edit the setting, and then press
ENTER
to confirm the setting.
If you want to continue making other settings, repeat the
procedure from step .
4
Press
OPTION
to exit the option menu.
If you decide to cancel without changing the setting, press
OPTION
before confirming the change.
1
3
4
2
2
