background image

ADDITIONAL INFORMATION

E-30

As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production.

Specifications

Digital audio system

System ............................................... MiniDisc digital audio system
Frequency response (20 Hz to 20 kHz) ................................. ±1 dB
Sampling frequency ........................................................... 44.1 kHz

(32 kHz and 48 kHz signals are converted to 44.1kHz for recording)

Laser Diode Properties

• Material: GaAs + GaAlAs
• Wavelength: 785 ± 20 nm
• Emission Duration: continuous
• Laser Output: max. 50 µW*
* This output is the value measured at a distance of about

200 mm from the objective lens surface on the Optical Pick-up

Block.

General

Power supply

[U.S.A. and Canada models] .......................... AC 120 V, 60 Hz
[Australia model] ............................................ AC 240 V, 50 Hz
[U.K., Europe, and Singapore models] ........... AC 230 V, 50 Hz
[General model] .................................. AC 115/230 V, 50/60 Hz

Power consumption ................................................................ 14 W
Dimensions ....................................................... 200 x 75 x 317 mm
Weight .................................................................................... 2.8 kg

Summary of Contents for MDX-M5






































Reviews: