background image

 

2

ME02R96

ENGLISH

 

*

Please dispose of used batteries in accordance with local regulations.

*

Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of
the product.

*

Company names and product names used herein are trademarks or registered trademarks of their respec-
tive owners.

*

Use of the software and this manual is governed by the license agreement which the purchaser fully agrees
to upon breaking the seal of the software packaging. (Please read carefully the important information and
the Software Licensing Agreement of the Studio Manager’s installation guide included with 02R96 before
installing the software.)

*

Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp.
reserves the right to change or modify products or specifications at any time without prior notice. Since
specifications, equipment or options may not be the same in every locale, please check with your Yamaha
dealer.

 

Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or

data that is lost or destroyed.

 

ADVARSEL!

 

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af
samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren.

 

VARNING

 

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som
rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.

 

VAROITUS

 

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmista-
jan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

 

NEDERLAND

THE NETHERLANDS

 

 

Dit apparaat bevat een lithium batterij voor
geheugen back-up.

 

 

This apparatus contains a lithium battery for
memory back-up.

 

 

Raadpleeg uw leverancier over de verwijde-
ring van de batterij op het moment dat u het
apparaat ann het einde van de levensduur
afdankt of de volgende Yamaha Service
Afdeiing:

Yamaha Music Nederland Service Afdeiing
Kanaalweg 18-G, 3526 KL UTRECHT
Tel. 030-2828425

 

 

For the removal of the battery at the moment
of the disposal at the end of the service life
please consult your retailer or Yamaha Ser-
vice Center as follows:
Yamaha Music Nederland Service Center

Address: Kanaalweg 18-G, 3526 KL 

UTRECHT

Tel: 030-2828425

 

 

Gooi de batterij niet weg, maar lever hem in
als KCA.

 

 

Do not throw away the battery. Instead, hand
it in as small chemical waste.

Summary of Contents for ME02R96










Reviews: