MG20XU/MG20/MG16XU/MG16/MG12XU/MG12 Owner’s Manual
32
Appendix
General Specifications
0 dBu = 0.775 Vrms, Output impedance of signal generator (Rs) = 150 Ω
All level controls are nominal if not specified.
For other specifications, see the included “Technical Specifications.”
*1 Noise is measured with A-weighting filter.
*2 Crosstalk is measured with 1 kHz band pass filter.
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or mod-
ify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale,
please check with your Yamaha dealer.
European Models
Inrush Current based on EN 55103-1:2009
3.0 A (on initial switch-on)
2.0 A (after a supply interruption of 5s)
Conforms to Environments: E1, E2, E3 and E4
MG12XU
MG12
MG16XU
MG16
MG20XU
MG20
Input channels
Mono: MIC/LINE
4
8
12
Mono/Stereo: MIC/LINE
2
2
4
Stereo: LINE
2
2
0
Output channels
STEREO OUT
2
MONITOR OUT
1
PHONES
1
AUX SEND
2
4
4
GROUP OUT
2
4
4
Bus
STEREO
1
1
1
GROUP
2
4
4
AUX
2 (MG12XU: incl. FX)
4 (MG16XU: incl. FX)
4 (MG20XU: incl. FX)
Input Channel
Function
PAD
26 dB
HPF
80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP
1 knob compressor (Gain/Threshold/Ratio)
Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB
Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ
HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
MID:
Gain: +15 dB/-15 dB
Frequency: 2.5 kHz
peaking
MID:
Gain: +15 dB/-15 dB
Frequency: Mono 250 Hz – 5 kHz peaking
Stereo 2.5 kHz peaking
LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED
LED turns on when post EQ signal reaches 3 dB below clipping (+17 dBu)
Level Meter
Pre Monitor LEVEL
2 × 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]
Built-in Effect
(XU Models only)
SPX Algorithm
24 programs, PARAMETER control: 1, FOOT SW: 1 (FX RTN CH on/off)
USB Audio
(XU Models only)
2 IN / 2 OUT
USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
Phantom Power Voltage
+48 V
Power Requirements
AC 100 – 240 V, 50 / 60 Hz
Power Consumption
22 W
30 W
36 W
Dimensions (W × H × D)
308 mm × 118 mm × 422 mm
(9.6" × 2.8" × 11.6")
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
444 mm × 130 mm × 500 mm
(17.5" × 5.1" × 19.7")
Net Weight
MG12XU: 4.2 kg (9.3 lbs.)
MG12:
4.0 kg (8.8 lbs.)
MG16XU: 6.8 kg (15.0 lbs.)
MG16:
6.6 kg (14.6 lbs.)
MG20XU: 7.1 kg (15.7 lbs.)
MG20:
6.9 kg (15.2 lbs.)
Included Accessory
Owner’s Manual, Technical Specifications, Cubase AI Download Information (XU model only)
Rack-mount kit (MG20XU, MG20, MG16XU, MG16 only)
Optional Accessory
Rack-mount kit: RK-MG12 (for MG12XU, MG12), Foot Switch: FC-5
Operating Temperature
0 to + 40°C
