11
En
Eng
lish
Fr
anç
a
is
Deu
ts
c
h
Sv
e
n
ska
It
alia
no
E
s
pa
ñol
Ned
e
rl
a
nds
Ру
сск
ий
To listen to a FM station, connect the antenna as described in “Connecting the speakers and antenna” (P. 2).
Display information (remote control only)
If you press
DISPLAY
on the remote control, the information shown on the front panel display will be switched in the
following order.
Displaying Radio Data System information
If you press
DISPLAY
on the remote control while Radio Data System information is being received, the information shown
on the front panel display will be switched in the following order.
If the signal transmission of the Radio Data System station is too weak, this unit may not be able to receive Radio Data System information
completely. In particular, RT (Radio Text) information uses a lot of bandwidth, so it may be less available compared to other types of
information.
LISTENING TO FM STATIONS
Selecting an FM station
1
Press the
RADIO
source button to switch the
audio source to FM.
2
Tune FM stations
Automatic tuning: Press and hold
TUNING
/
.
Manual tuning: Press
TUNING
/
repeatedly.
If you tune to a station manually while receiving FM, the sound
will be monaural.
1
2
Preset number and frequency
Reception status*
* Example of reception status indication.
TUNED/STEREO:
A strong FM stereo broadcast is being received.
TUNED/MONO:
A monaural FM broadcast is being received (even if the FM
broadcast is stereo, reception will be monaural if the signal is weak).
Not TUNED:
No broadcast is being received.
PS (Program Service)
PTY (Program Type)
RT (Radio Text)
CT (Clock Time)
Reception status
Preset number and frequency
