Utility Settings
MM6/MM8 Owner’s Manual
65
■
Utility Display List
* Press the [INC/YES][DEC/NO] buttons simultaneously to instantly recall the default settings (except for initial MIDI setup).
Group
Function Item
Display Indication
Range/Settings
Description
EFFECT
Reverb Type
Reverb Type
01–26
Determines the Reverb type, “26” is “off”. (See the list
on page 100)
Chorus Type
Chorus Type
01–31
Determines the Chorus type. “31” is “off”. (See the
list on page 100)
DSP On/Off
DSP On/Off
ON/OFF
Sets the equalizer applied to the instrument output
(including headphones or other output) for optimum
sound in different listening situations.
DSP Type
DSP Type
001–190
Determines the DSP type. “190” is “off”. (See the list
on page 101).
Master EQ Type
Master EQ Type
1 (Flat), 2 (Attack),
3 (Hard), 4 (Retro),
5 (HighPass)
Selects the Master EQ type. Use this feature to boost
the bass, reduce the reproduction range for special
effects, and more.
VOLUME
Pattern Volume
Pattern Volume
000–127
Determines the volume of pattern playback.
Song Volume
Song Volume
000–127
Determines the volume of song playback.
OVERALL
Tuning
Tuning
415.3–466.2 Hz
Sets the pitch of the instrument’s sound in approxi-
mately 0.2 Hertz increments.
Pitch Bend Range
Pitch Bend Range
01–12
Sets the pitch bend range in semitone increments.
Split Point
Split Point
000–127(C-2–G8)
Determines the highest key for the Split voice and
sets the Split “point”—in other words, the key that
separates the Split (lower) and Main (upper) voices.
The Split Point and Accompaniment Split Point set-
tings are automatically set to the same value.
Touch Sensitivity
Touch Sensitivity
1 (Soft), 2 (Medium),
3 (Hard), 4 (off)
Determines the sensitivity of the feature.
Chord Fingering
Chord Fingering
1 (Multi Finger),
2 (FullKeyboard)
Sets the chord detection mode.
In the Multi Finger mode both normal chords and
simple chords played to the left of the split point are
detected. In the Full keyboard mode normal chords
played anywhere on the keyboard will be detected,
and notes played normally will sound as well.
ARPEGGIO
Arpeggio Type
Arpeggio Type
01–150
Selects the arpeggio type. Refer to the arpeggio list
Arpeggio Velocity
Arpeggio Velocity
1 (Original), 2 (Thru)
Sets the arpeggio volume.
PC MODE
PC Mode
PC Mode
ON/OFF
Optimizes the MIDI settings for connecting to a com-
puter (page 79).
MIDI
Local On/Off
Local
ON/OFF
Local control determines whether or not notes played
on the instrument are sounded by its internal tone
generator system: the internal tone generator is
active when local control is on, and inactive when
local control is off. (page 78)
External Clock
On/Off
External Clock
ON/OFF
These settings determine whether the instrument is
synchronized to its own internal clock (OFF), or to a
clock signal from an external device (ON). (page 78)
Keyboard Out
Keyboard Out
ON/OFF
These settings determine whether keyboard perfor-
mance data is transmitted via the MIDI output (ON)
or not (OFF).
Pattern Out
Pattern Out
ON/OFF
Determines whether pattern data will be output via
the MIDI output (ON) or not (OFF) during pattern
playback.
Song Out
Song Out
ON/OFF
Determines whether song data will be output via the
MIDI output (ON) or not (OFF) during song playback.
Initial Setup
Initial Setup
YES/NO
Sends the instrument’s panel data to a computer.
Press [INC/YES] to send, or press [DEC/NO] to can-
cel.
METRONOME
Time Signature –
Numerator
Time Signature –
Numerator
00–60
Determines the time signature of the metronome.
Time Signature –
Denominator
Time Signature –
Denominator
2, 4, 8,16
Sets the length of each metronome beat.
Volume
Metronome Vol-
ume
000–127
Determines the volume of the metronome.
UTILITY
Demo Cancel
Demo Cancel
ON/OFF
When ON, demo playback will not start even if the
[SONG] and [PATTERN] buttons are pressed simulta-
neously.
Summary of Contents for MM8
Page 1: ...EN Owner s Manual...
