Yamaha MO6 Owner'S Manual Download

Page: 189 / 240

oice mode

erf

ormance

mode

Song mode

Utility mode

File mode

Master mode

attern mode

Mixing V

oice

mode

Ref

erence

Song Mixing mode

189

Owner’s Manual

In this mode, you can set up mixing data for your songs, and set various parameters for the tone generator parts—including the desired
Voice, as well as its level, pan, EQ, effect and other settings.
Song Mixing parameters are not actually part of the Song sequence data in each track, but rather are settings for the tone generator, as it is
played back by the Song data. As such, the Song Mixing parameter settings are not recorded to the Song tracks.

Parameter settings made in the Song Mixing mode and Song Mixing Edit mode should be stored to internal memory (DRAM) as part of the Song data.
In addition, make sure to save the entire Song data (including the Mixing settings) to the USB storage device, since the data in DRAM is stored only
temporarily (page 150).

Parameter settings in the Song Mixing mode and Song Mixing Edit mode can be stored as a template to internal Flash ROM, as well as being stored as
part of a Song. See page 94 for details.

[F6] SONG (Song Job)

01: Copy Song

This Job copies all data from a selected source
Song to a selected destination Song. The Mixing
Voice used by the source Song is also copied.

This Job overwrites any data

already existing in the destination
Song.

02: Split Song To Pattern

This Job allows you to copy a part of the current
Song – all 16 tracks over a specific range of
measures – to a specific Pattern, letting you use
Song data to create a Pattern.

This Job overwrites any data

already existing in the destination
Pattern and section.

03: Clear Song

This Job deletes all data from the selected Song or all Songs, including the Mixing Voices.

04: Song Name

This Job lets you assign a name to the selected Song. See “Basic Operation” on page 38.

Song Mixing mode

[SONG]

➞

Song selection

➞

[MIXING]

[F1] VOL/PAN

From this display you can set the Pan and Volume for each Part (track).

PAN

Determines the stereo pan position for each part.

Settings:

L63 (far left) – C (center) – R63 (far right)

VOLUME

Determines the volume for each Part, allowing you to set the optimum level balance of all the Parts.

Settings:

0 – 127

You can also adjust the Volume by using the Control Sliders. See page 52 for details.

[F2] VOICE

From this display you can select a voice for each Part. Mixing Voices can also be selected.

The Category Search function can also be used to select Voices here, except for Mixing Voices.

[F3] EFFECT

Pressing the [F3] EFFECT button in the Song Mixing mode calls up the [SONG]

→

[MIXING]

→

[EDIT]

→

[COMMON]

→

[F6] EFFECT display in the Song

Mixing Edit mode. From this display, you can set the effect related parameters for the current Song. See page 144 for details.

[F4] EF SEND (Effect Send)

From this display you can make basic effect settings for each Part—Send Level for the System Effect (Reverb, Chorus) as well as the Dry Level for Insertion
Effects.

For information on the effect connections in the Song mode, seepage 144.

[F5] VCE ED (Mixing Voice Edit)

Press the [F5] VCE ED button in the Song Mixing mode to enter the Mixing Voice Edit mode. Press the [EXIT] button to return to the original display in the
Song Mixing mode.
Normal Voices can be edited specifically for use with the Song/Pattern modes, creating a dedicated “Mixing Voice.” Refer to “Mixing Voice mode” on page
203 for details.

Source Song

Destination Song

CAUTION

Source Song range (in measures)

Destination Pattern and section

CAUTION