Quic
k Guide
Editing a Pr
ogram
Editing a Performance
66
Owner’s Manual
Storing/Saving the created Performance
Two steps are necessary in order to store (save) your Performance—storing the edited Performance to internal memory and
saving the stored Performances to a USB storage device.
When you turn off the power to the instrument, User Performances saved in the Performance Store mode are not erased. As
such it is not necessary to save the data to USB storage device; however, you may want to save it for backup or
organizational purposes, using the Save operation.
Storing the edited Performance as a User Performance to internal memory
Select a Performance number by using the data dial, [INC/
YES] and [DEC/NO] button.
When you execute the Store operation, the settings for the destination
memory will be overwritten. Important data should always be backed
up to a separate USB storage device.
The display prompts you for confirmation. Press the [DEC/
NO] button to cancel the Store operation.
After the Performance has been stored, a “Completed”
message appears and operation returns to the
Performance Play display.
Never attempt to turn off the power while an “Executing...” or “Please
keep power on” message is shown. Turning the power off in this state
may cause the system to freeze and prevent normal startup the next
time the power is turned on, as well as resulting in the loss of all user
data.
If you select another Performance without storing, the currently edited
Performance will be lost. Make sure to store the edited Performance
before selecting another Performance.
[PERFORM]
➞
[STORE]
Performance Edit
Store
Save
USB storage
device
Internal memory
User Performance 001
User Performance 002
User Performance 128
User Performance
Bank 1
Storing edited Performances
individually
All the User
Performance data in
internal memory
can be saved as a
single file.
1
After editing the Performance, press the
[STORE] button to enter the Performance
Store mode.
2
Select the destination Performance memory.
3
Press the [ENTER] button.
CAUTION
DEC NO
INC YES
EXIT
ENTER
EXECUTE
4
To execute the Store operation, press the
[INC/YES] button.
DEC NO
INC YES
EXIT
ENTER
EXECUTE
CAUTION
CAUTION
Summary of Contents for MO6
Page 1: ...OWNER S MANUAL MUSIC PRODUCTION SYNTHESIZER EN...
Page 236: ...236 Owner s Manual Memo...
Page 237: ...237 Owner s Manual Memo...
Page 238: ...238 Owner s Manual Memo...
