105
MONTAGE6/MONTAGE7
■
DISPLAY MESSAGES
MONTAGE Owner’s Manual
56
Display Messages
LCD indication
Description
** will be deleted.
This message appears when the specified operation you are about to execute will
cause the specified data to be deleted.
** will be overwritten.
This message appears when a file/folder having the same name as the one you
are about to save already exists.
Activate the source controller to assign.
You can assign the parameter to the controller you are about to activate.
Advanced settings will be initialized.
All settings executed in [Advanced] tab will be initialized.
All data and libraries will be initialized. Unsaved
user data will be lost.
All data and libraries will be initialized. Unsaved user data will be lost.
All data is initialized upon power-on.
All data is initialized upon power-on.
All settings will be initialized. User data is kept.
All settings will be initialized. User data is kept.
All sound will be stopped during optimization.
This message appears before the internal memory is restored. All sound will be
stopped during the optimization.
All user data will be initialized. Unsaved user data
will be lost.
All user data will be initialized. Unsaved user data will be lost.
Are you sure?
Confirms whether you want to execute a specified operation or not.
Audio Rec stopped due to lack of memory space. The USB flash memory device is full and no more audio recording data can be
saved. Use a new USB flash memory device, or make space by erasing
unwanted data from the USB flash memory device.
Auto power off disabled.
This message appears before Auto Power Off is disabled.
Bulk data protected.
Bulk data cannot be received because of the setting.
Can’t process.
The MONTAGE cannot process a requested operation.
Completed.
The specified load, save, format, or other Job has been completed.
Connecting to USB device...
Currently recognizing the USB flash memory device connected to the [USB TO
DEVICE] terminal.
Copy protected.
You have attempted to export or save a copy-protected digital audio source.
Current user data will be overwritten by **.
This message appears when saving a file, and user data under that name already
exists.
Data memory full.
The internal memory is full, preventing storing of the recorded data in the Library.
Device number is off.
Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch.
Bulk data cannot be transmitted/received since the device numbers do not
match.
File is not found.
The specified file was not found during a Load operation.
File or folder already exists.
A file/folder having the same name as the one you are about to save already
exists.
File or folder path is too long.
The file or folder you tried to access cannot be accessed because the maximum
amount of characters indicating the path has been exceeded.
Folder is not empty.
You have attempted to delete a folder that contains data.
Illegal bulk data.
An error occurred while receiving a Bulk data or Bulk Request message.
Illegal file name.
The specified file name is invalid. Try entering a different name.
Illegal file.
The specified file is unusable by this synthesizer or cannot be loaded.
Keybank full.
The maximum overall number of Key Banks has been exceeded when executing
a Load operation.
Library full.
The maximum overall number of Libraries has been exceeded when executing
the related operations.
MIDI buffer full.
Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error.
An error occurred when receiving bulk data.
No data.
This message appears when the selected track or range contains no data. Select
an appropriate track or range.
Summary of Contents for Montage 6
