manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

MOTIF XF Reference Manual

144

V

oice mode

Song mode

P

a

tter

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf
or
mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

Song Recording

In the Song Record mode, you can use the sequencer to record your keyboard performance, track by track, to a selected 
Song. Press the [

I

] (Record) button from the Song Play mode to enter the Song Record mode. 

n

Recording the audio data for a Song can be executed in the Sampling Record mode (page 203). 

Realtime Recording

This method lets you record the performance data as it is 
played, allowing you to capture all the nuances of an actual 
keyboard performance. Recording can be carried out while 
monitoring playback of other already-recorded tracks. You 
can also transmit sequence data from an external MIDI 
instrument to the MOTIF XF and simultaneously record up 
to 16 tracks (page 148). 
The Realtime recording consists of three methods: 
Replace, Overdub, and Punch. 

Song Recording procedure 

Here in outline form is the process of recording a Song. 

1

Press the [SONG] button to enter the Song Play 
mode, then select a Song to be recorded 
(page 136). 

Select an empty Song if you wish to create a new Song 
from scratch. If an empty Song is not found, delete any 
unnecessary Song(s) by using the Clear Song Job 
(page 165). 

2

Press the [

I

] (Record) button to call up the 

Record Setup display (page 145). 

Prepare for recording by setting the time signature, 
tempo, track to be recorded, Voice, and recording 
method. If you wish to record using an Arpeggio, set 
the necessary parameters from the Arpeggio display 
(page 147).

3

Record your keyboard performance. 

For details, see page 147. 

4

Edit the recorded Song using the Song Job 
(page 153) and Song Edit (page 150). 

5

Press the [STORE] button to store the recorded 
Song to internal User Memory. 

NOTICE

The recorded Song will be lost when selecting a different Song, 
calling up a different mode, or turning the power off. Make sure 
to store the Song data to internal memory by pressing the 
[STORE] button before selecting a different Song, calling up a 
different mode, or turning the power off. 

6

Save the created Song data to a USB storage 
device or to a connected computer as desired 
(page 241). 

Song Store—[STORE]

This section covers how to store the Songs you have 
recorded and edited. By executing the Store operation, the 
Song data you have created will be maintained even if the 
power has been turned off. Pressing the [STORE] button 
calls up the Song Store window. 
The following data will be stored by the Song Store 
operation. 

Sequence data

MIDI data generated and recorded by your keyboard 
performance including the controller operations. 

Tone Generator data

Mixing settings (Common Edit parameters and Part Edit 
parameters)

n

The Mixing Voices can be edited in the Mixing Voice Store 
window (page 199). 

To use Song Store: 

1

Call up the Song Store window. 

Pressing the [STORE] button calls up the Song Store 
window. 

2

Select a destination Song number. 

The name of the selected Song number is shown. 

NOTICE

This operation overwrites any data already existing in the 
destination Song. 

3

Press the [ENTER] button. (The display 
prompts you for confirmation.) 

Press the [DEC/NO] button to cancel the Store 
operation. Song Store is canceled, and operation 
returns to the previous display. 

4

Press the [INC/YES] button to execute the 
Store operation. 

After the Song has been stored, a “Completed” 
message appears and operation returns to the Song 
Play display. 

n

If there is not enough memory space for the Song/Pattern, 
an alert message appears, and you will not able to store 
any additional Songs/Patterns. If this happens, delete 
unnecessary Patterns/Songs by using the Song/Pattern 
Job, then try the Store operation again.

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

Roland RP-2 Owner'S Manual preview
RP-2
Brand: Roland Pages: 12
Singular Sound BeatBuddy Manual preview
BeatBuddy
Brand: Singular Sound Pages: 56
Signotec Gamma User Manual preview
Gamma
Brand: Signotec Pages: 16
Simmons SDS 1 Operating Instructions Manual preview
SDS 1
Brand: Simmons Pages: 10
Cyclone Analogic Beat Bot TT-78 Operation Manual preview
Beat Bot TT-78
Brand: Cyclone Analogic Pages: 59

Brands by name

Popular brands

Load more brands