manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

MOTIF XF Reference Manual

150

V

oice mode

Song mode

P

a

tter

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf
or
mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

Editing MIDI Events (Song Edit)

The Song Edit mode lets you edit the already recorded Songs or insert the new data to the Songs. It can be used to correct 
mistakes as well as add dynamics or effects such as vibrato to refine and finish the Song. Press the [EDIT] button from the 
Song Play mode to go to the Song Edit mode. 

n

The Song Edit mode gives you comprehensive, detailed controls for editing the MIDI events of individual Song tracks. MIDI events are 
messages (such as note on/off, note number, program change number, etc.) that make up the data of a recorded track. 

The Song Edit mode consists of the Event List display and 
the Insert Event window. The Event List display lets you 
correct or delete already inserted MIDI events and the 
Insert Event window lets you insert new events to the Song. 
Press the [EDIT] button from the Song Play mode to go to 
the Event List display. Press the [F5] button to call up the 
Insert Event window. 

Event List display

The Event List display lets you correct or delete existing 
events. 

Insert Event window

The Insert Event window lets you insert new events to the 
Song. 
Pressing the [F5] button on the Event List display calls up 
the Insert Event window. To return back to the Event List 
display, press the [EXIT] button. 

Editing the recorded data 

This section shows how to correct or delete previously 
recorded events. 

1

Press the [EDIT] button from the Song Play 
display to call up the Event List display 
(page 151). 

2

Select the track to be edited. 

Pressing the [F4] Track Sel button switches the 
Recording track among Tracks 1 – 16, the Scene track 
and the Tempo track. When “1 – 16 tracks” is selected, 
you can select the track to be edited by pressing any of 
the Number buttons [1] – [16]. 

3

Move the cursor to the event or parameter to be 
edited. 

Use the [

L

]/[

M

] (Cursor Up/Down) button to move the 

cursor to the desired timing. Press the [

G

] (Rewind)/

[

H

] (Fast Forward) button to move the cursor by 

single measures. Use the [<]/[>] (Cursor Left/Right) 
button to move the cursor to the parameter to be 
edited. 

n

For details about each event and parameter, see page 30.

n

The Event List window may have an overwhelming 
number of events, and it may be difficult to find a specific 
desired event. To help narrow down your search, use the 
View Filter function. This conveniently lets you specify 
which classes of events will be displayed and which will 
not, making it much easier and faster to find desired 
events. For information about the View Filter display, see 
page 152.

4

Change the parameter settings or location of 
the event. 

Edit the value by using the [INC/YES], [DEC/NO] 
buttons and the data dial. The edited event will flash on 
the display. 
Change the event location by editing the MEAS 
(measure), BEAT, and CLOCK. Press the [F6] button to 
delete the event at the cursor location. 

n

When “NUM” is indicated in the tab corresponding to the 
[SF6] button, you can use the [F1] – [F6] buttons and the 
[SF1] – [SF5] buttons as numeric key pads by pressing 
the [SF6] NUM button. 

n

The note and velocity can be edited also by pressing the 
desired note on the keyboard, even though the [KBD] icon 
is not shown. 

Event List display and Insert Event 
window

Event List display

Insert Event window

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

Medeli DD602 Setup Manual preview
DD602
Brand: Medeli Pages: 5
Korg Beatlab mini EFGSJ2 Owner'S Manual preview
Beatlab mini EFGSJ2
Brand: Korg Pages: 8
Yamaha DTX-Multi 12 Firmware Update Manual preview
DTX-Multi 12
Brand: Yamaha Pages: 4
Yamaha DTPK95MSP Accessories List preview
DTPK95MSP
Brand: Yamaha Pages: 1
Yamaha DT10 Owner'S Manual preview
DT10
Brand: Yamaha Pages: 3
Yamaha DTX RS500 Owner'S Manual preview
DTX RS500
Brand: Yamaha Pages: 10
Yamaha Drums Assembly Manual preview
Drums
Brand: Yamaha Pages: 4
Yamaha DTX PCY95AT Owner'S Manual preview
DTX PCY95AT
Brand: Yamaha Pages: 15
Yamaha DTX KP128 Owner'S Manual preview
DTX KP128
Brand: Yamaha Pages: 17
Yamaha DRTX XP70 Owner'S Manual preview
DRTX XP70
Brand: Yamaha Pages: 11
Yamaha DD-9 Owner'S Manual preview
DD-9
Brand: Yamaha Pages: 13
Yamaha DD-8 (French) Manuel Du Propriétaire preview
DD-8
Brand: Yamaha Pages: 22
Yamaha DD-7 (French) Owner'S Manual preview
DD-7
Brand: Yamaha Pages: 23
Yamaha Druid Pro DD-55 Service Manual preview
Druid Pro DD-55
Brand: Yamaha Pages: 29
Yamaha Druid Pro DD-55 Owner'S Manual preview
Druid Pro DD-55
Brand: Yamaha Pages: 47
Yamaha DTX400K Owner'S Manual preview
DTX400K
Brand: Yamaha Pages: 68
Yamaha DD-75 Owner'S Manual preview
DD-75
Brand: Yamaha Pages: 60
Yamaha DD-65 (French) Mode D'Emploi preview
DD-65
Brand: Yamaha Pages: 64

Brands by name

Popular brands

Load more brands