manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

V

oice mode

Song mode

P

a

tt

er

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf

or

mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

Pattern Playback

MOTIF XF Reference Manual

171

1

Select a Pattern from the Play display (page 168). 

2

Press the [F4] button to call up the Patch 
display. 

3

Select a Section (A – P). 

Move the cursor to the Section, then select the desired 
Section by using the data dial, [INC/YES] and [DEC/
NO] button. 

4

Set the meter (time signature), tempo, and 
length of the Pattern. 

Move the cursor to the desired parameter (such as 
length, time signature or tempo), then set the value by 
using the data dial, [INC/YES] and [DEC/NO] button. 

5

Assign the desired Phrase to each track. 

Move the cursor to a track then set a Phrase number by 
using the data dial, [INC/YES] and [DEC/NO] buttons. 
Phrase assignment can be executed also during 
Pattern playback. 
To confirm whether the Phrase is assigned properly or 
not, solo the track to which the Phrase is assigned by 
following the procedure below. Press the [SOLO] button 
so that its indicator lights and press any of the Number 
[1] – [16] buttons to select a track to which you 
assigned the Phrase. 
There are three methods that can be used to create a 
Phrase: 

• Recording the new phrase using the Pattern Record 

function (page 177)

• Copying the Phrase from another Pattern by using the 

[SF5] button. 

• Converting a Part of the Song data to a Phrase by 

using the Get Phrase from Song Job (page 184). 

6

Repeat steps 3 through 5 above to finalize an 
entire Pattern. 

Create Sections used for the intro, melody A, melody B, 
main theme and ending of the entire Song. 

n

It is a good idea to use the Copy Pattern Job (page 186) if 
you wish to create a Section that is based on or sounds 
similar to an already existing Section. 

7

Press the [STORE] button to store the Pattern. 

For detailed instructions on storing a Pattern, see 
page 177. 

Pattern Chain—[F5] Chain (Pattern 
Chain)

Pattern Chain allows you to string several different Sections 
together to make a one complete Song. For example, 
create a Section A for the intro, a Section B for the verse, a 
Section C for the chorus, and a Section D for the ending—
and you have the basic blocks to build an original Song. 
The created Pattern Chain data can be converted to MIDI 
sequence data and stored to a Song. To call up the Pattern 
Chain display, press the [F5] Chain button from the Pattern 
Play mode. 

A Pattern Chain can be created for each Pattern, letting 
you call up a different, dedicated Pattern Chain each time 
you select a Pattern. 
The following events can be recorded to the Pattern Chain.

• Playback order of Sections

• Pattern track on/off—Solo and Mute

• Tempo change

• Time signature change

There are two methods to create a Pattern Chain: 
Recording playback of a Pattern in the Pattern Record 
display in real time, and programming the playback order 
of Sections one by one in the Pattern Chain Edit display. 
The Pattern Chain data recorded in real time can be edited 
in the Pattern Chain Edit display. 

The Pattern Chain display lets you play the Pattern Chain 
data you’ve created. Press the [F5] Chain button from the 
Pattern Play mode to go to the Pattern Chain Play display. 

The operation in the Pattern Chain display is basically 
same as in the Pattern Play display with the exception that 
the Pattern number cannot be selected. For details on 
parameters which are not explained here, refer to the 
Pattern Play display (page 168). 

n

Depending on the selected parameter, the NUM icon is shown 
at the tab menu corresponding to the [SF6] button. In this 
condition, you can use the [SF1] – [SF5] and [F1] – [F5] 
buttons as number buttons by pressing the [SF6] NUM button. 
For details, see page 36. 

Creating a Pattern

Pattern Chain Playback—[F5] Chain

1

2

3

4

6

5

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

ddrum BETA PRO User Manual preview
BETA PRO
Brand: ddrum Pages: 24
ATV aD5 Quick Start Manual preview
aD5
Brand: ATV Pages: 16
Krüger & Matz Warrior KM0764 Quick Start Manual preview
Warrior KM0764
Brand: Krüger & Matz Pages: 2
Yamaha YDD65 Mode D'Emploi preview
YDD65
Brand: Yamaha Pages: 64
MC Crypt 30 39 97 Operating Instructions Manual preview
30 39 97
Brand: MC Crypt Pages: 86
Medeli DD630 Setup Manual preview
DD630
Brand: Medeli Pages: 2
Medeli DD620 Setup Manual preview
DD620
Brand: Medeli Pages: 4
Medeli DD518DX Assembly Instructions preview
DD518DX
Brand: Medeli Pages: 2
Medeli DD403 Setup Manual preview
DD403
Brand: Medeli Pages: 3
Medeli AP40 Owner'S Manual preview
AP40
Brand: Medeli Pages: 4
Medeli DD302 Owner'S Manual preview
DD302
Brand: Medeli Pages: 12
Medeli DD502W Instruction Manual preview
DD502W
Brand: Medeli Pages: 16
Medeli DD315 Owner'S Manual preview
DD315
Brand: Medeli Pages: 16
Medeli AW DD60 Owner'S Manual preview
AW DD60
Brand: Medeli Pages: 16
Medeli MZ528 Owner'S Manual preview
MZ528
Brand: Medeli Pages: 32
Medeli DD-306 Instruction Manual preview
DD-306
Brand: Medeli Pages: 20
Medeli DD610S Owner'S Manual preview
DD610S
Brand: Medeli Pages: 32
Medeli DD600 Owner'S Manual preview
DD600
Brand: Medeli Pages: 32

Brands by name

Popular brands

Load more brands