manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

Audio Recording to Song/Pattern (Sampling mode)

MOTIF XF Reference Manual

210

V

oice mode

Song mode

P

a

tter

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf
or
mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

Slicing percussive phrases having short decays

First, try slicing using “beat1.” If the result has a weak 
attack or the release portions of the phrase seem to 
overlap, try again using “beat2.” Try adjusting the envelope 
sensitivity for finer control. 
If after using “beat1” the attack portions overlap or the 
overall rhythmic feel is degraded, try again using “beat3.” 
Make final adjustments with the Envelope Sensitivity 
parameter. 

Slicing phrases having long decays

First, try slicing using “phrase1.” If the result has a weak 
attack or the release portions of the phrase seem to 
overlap, try again using “phrase2.” Make final adjustments 
with the Envelope Sensitivity parameter. 
If after using “phrase1” the points between the slices 
sounds rough and the overall feel is choppy, try again 
using “phrase3” or “phrase4” and set Sub Divide to a finer 
resolution. Make final adjustments with the Envelope 
Sensitivity parameter. The “phrase3” setting is generally 
best for sustained strings or brass type sounds with no 
vibrato—in other words, the pitch remains constant. It can 
also produce echo-like effects when applied to percussive 
phrases with short decay. 
If after using “phrase1” the points between the slices 
sounds rough and the overall feel is choppy, try again 
using “phrase4” and set Sub Divide to a finer resolution. 
Make final adjustments with the Envelope Sensitivity 
parameter. The “phrase4” setting is generally best for 
sustained strings or brass type sounds with vibrato, as well 
as vocal phrases. 

Individual wave data slices created through Slice 
operations require approximately 1.5 times the original 
memory because a tail section is automatically added and 
fade-in and fade-out sections are automatically created at 
the beginning and end of the wave data. This helps to 
maintain maximum sound quality when the tempo is 
increased, and results in smoother connections between 
slices (no tail section is created when the “quick” slice type 
is selected).
A memory work area is required for the processing 
calculations carried out for each Slice operation, as well as 
sufficient memory to hold the completed waveforms. When 
the sampling frequency is 44.1 kHz, the approximate 
amount of memory (expressed in kilobytes) required for 
each Slice type is listed below. 

For mono Samples N = 5.5, and for stereo Samples N = 8. 
Also, the number of slices is doubled for stereo Samples. 

Sampling Edit

[INTEGRATED SAMPLING] 

 [EDIT]

The Sampling Edit mode gives you comprehensive, detailed controls for editing the recorded Sample and changing the 
Sample settings. Press the [EDIT] button from the Sampling Main display to call up the Sampling Edit display. Press the 
[EXIT] button to go back to the Sampling Main display. 

Same as in the Sampling mode called up from the Voice mode/Performance mode. For information about Sampling Edit, see 
page 126. 

Sampling Job

[INTEGRATED SAMPLING] 

 [JOB]

The Sampling Job mode lets you process and modify Samples you have recorded. 19 Sampling Jobs are available. 

Same as in the Sampling mode called up from the Voice mode/Performance mode. For information about the Sampling 
Jobs, see page 129. 

Tips for using the Slice Types

Wave Memory Required for Slice 
Operations

beat 1

Original wave size X N + (0.3 X number of slices)

beat 2

Original wave size X N + (0.2 X number of slices)

beat 3

Original wave size X N + (0.3 X number of slices)

phrase 1

Original wave size X N + (5.8 X number of slices)

phrase 2

Original wave size X N + (1.4 X number of slices)

phrase 3

Original wave size X N + (0.4 X number of slices)

phrase 4

Original wave size X N + (1.4 X number of slices)

quick

Original wave size X N + (0.7 X number of slices)

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

Penpower Technology Write2Go User Manual preview
Write2Go
Brand: Penpower Technology Pages: 30
Yamaha MR10 Owner'S Manual preview
MR10
Brand: Yamaha Pages: 12
Yamaha MBH9500 Owner'S Manual preview
MBH9500
Brand: Yamaha Pages: 16
Yamaha EAD10 Owner'S Manual preview
EAD10
Brand: Yamaha Pages: 72
Yamaha DTXTREME IIs (French) Mode D'Emploi preview
DTXTREME IIs
Brand: Yamaha Pages: 103
Yamaha DTXTREME III Service Manual preview
DTXTREME III
Brand: Yamaha Pages: 131
Yamaha DTXTREME Reference Manual preview
DTXTREME
Brand: Yamaha Pages: 136
Yamaha DTXTREME III Owner'S Manual preview
DTXTREME III
Brand: Yamaha Pages: 160
V-Drums TD-50KV2 Setup Manual preview
TD-50KV2
Brand: V-Drums Pages: 2
FAS International 480 BUDGET Manual preview
480 BUDGET
Brand: FAS International Pages: 136
Milwaukee MX FUEL MXF500 Operator'S Manual preview
MX FUEL MXF500
Brand: Milwaukee Pages: 32
Ivation IVADRMK10 User Manual preview
IVADRMK10
Brand: Ivation Pages: 8
Yamaha Stage Assembly Manual preview
Stage
Brand: Yamaha Pages: 4
Yamaha ED-10 Owner'S Manual preview
ED-10
Brand: Yamaha Pages: 2
Yamaha DTX750K Assembly Manual preview
DTX750K
Brand: Yamaha Pages: 2
Yamaha DTX Drums PCY90AT Owner'S Manual preview
DTX Drums PCY90AT
Brand: Yamaha Pages: 12

Brands by name

Popular brands

Load more brands