manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

Playing the Keyboard in the Voice Play Mode

MOTIF XF Reference Manual

46

V

oice mode

Song mode

P

a

tter

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf
or
mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

Using Knobs and Control Sliders

One of the more powerful performance features of the 
MOTIF XF is its extensive set of real-time controls—
especially the Knobs and Control Sliders. These let you 
adjust a variety of parameters for the current Voice, such as 
effect depth, attack/release characteristics, tonal color, and 
others. These real-time controls can be used to change the 
sound as you play or to quickly edit and customize the 
Voice. Three functions can be assigned to each knob, 
alternatively selected via the [SELECTED PART CONTROL] 
button. Each time the button is pressed, the lamp lights 
alternatively in descending order, TONE 1 

 TONE 2 

 

ARP FX. For details, refer to the Owner’s Manual. 

n

If the [E] (Edit) Indicator appears in the top right of the display, 
the current Voice can be stored (page 54) as a new User 
Voice. 

n

Holding down the [SELECTED PART CONTROL] button for a 
few seconds will alternate the lit lamp from the current one to 
TONE 1. 

n

A red point on the Knob or Slider graphic indicates the current 
value to which the Knob or Slider is set. Moving the Knob or 
Slider has no effect on the sound until this point is reached. 
Once you move the Knob or Slider past this point, the red 
point disappears and moving the Knob or Control Slider 
affects the sound. 

n

You can confirm the functions assigned to the eight knobs in 
the Voice Play display, called up via the [F1] button. When a 
display other than the Voice display is shown, you can confirm 
the knob functions by pressing the [SELECTED PART 
CONTROL] button, which calls up the Control Function 
window. 

Red point (current value)

Knob Functions

1

 When the TONE 1 lamp is turned on:

Moving Knobs 1 and 2 changes the Filter parameters on the EG/EQ display. Moving Knobs 3 – 6 
changes the Amplitude EG parameters. 

Knob 1

CUTOFF

Raises or lowers the Filter Cutoff Frequency (page 51) to adjust the tone brilliance. 

Knob 2

RESONANCE

Raises or lowers the Resonance (page 51) to boost the level of the signal in the area of the cutoff 
frequency. By emphasizing the overtones in this area, this can produce a distinctive “peaky” tone, 
making the sound brighter and harder. 

Knob 3

ATTACK

Increases or decreases the EG Attack Time (page 51) of the current Voice. The smaller the value, the 
faster the attack. 

Knob 4

DECAY

Increases or decreases the EG Decay Time (page 51) of the current Voice to determine how fast the 
volume falls from maximum attack level to the sustain level. The smaller the value, the faster the decay. 

Knob 5

SUSTAIN

Increases or decreases the EG Sustain Level (page 51) at which the volume will continue while a key is 
held, after the initial attack and decay. Turn the knob counter-clockwise to make the sound cut off more 
sharply after the decay. 

Knob 6

RELEASE

Increases or decreases the EG Release Time (page 51) of the sound to determine how fast the volume 
falls from the sustain level to zero when a key is released. The lower the value, the faster the release. 

Knob 7

ASSIGN 1

A variety of functions can be assigned to these Knobs. You can confirm the functions currently 
assigned to these Knobs in the Voice Play display (page 48). The Controller Set display (page 61) in 
the Voice Common Edit mode lets you assign the functions to these Knobs. 

Knob 8

ASSIGN 2

2

 When the TONE 2 lamp is turned on:

Moving Knobs 1 – 5 changes the EQ parameters in the EG/EQ display (page 51). Moving Knobs 6 – 8 
changes the parameters in the Play Mode display (page 55) and the Effect Connect display (page 64) of 
the Voice Common Edit mode. 

Knob 1

EQ LOW

Increases or decreases the EQ Low Gain (page 51) to change the sound. 

Knob 2

EQ MID F 
(EQ Middle Frequency)

Increases or decreases the EQ Middle Frequency (page 51) around which the band is adjusted via 
Knob 3 (EQ MID). 

Knob 3

EQ MID (EQ Middle Gain)

Increases or decreases the EQ Middle Gain (page 51) to change the current Voice. 

Knob 4

EQ MID Q (EQ Middle Q)

Increases or decreases the EQ Middle Q (page 51) to change the width of the band over which you 
can adjust the gain via Knob 3 (EQ Middle Gain). Turning Knob 4 clockwise increases the Q value to 
reduce the band width. Turning Knob 4 counter-clockwise decreases the Q value to widen the band 
width. 

1

2

3

[SELECTED PART CONTROL] button

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

Yamaha TP-3123 Owner'S Manual preview
TP-3123
Brand: Yamaha Pages: 11
Yamaha RS75 Assembly Instructions preview
RS75
Brand: Yamaha Pages: 3
Yamaha RS40 Assembly Manual preview
RS40
Brand: Yamaha Pages: 2
Yamaha RS-80 Assembling Instructions preview
RS-80
Brand: Yamaha Pages: 2
Yamaha RS-75 Assembling Instructions preview
RS-75
Brand: Yamaha Pages: 2
Yamaha RS-65S Assembling Instructions preview
RS-65S
Brand: Yamaha Pages: 2
Yamaha RS-65 Assembling Instructions preview
RS-65
Brand: Yamaha Pages: 4
Yamaha XP105T-M Owner'S Manual preview
XP105T-M
Brand: Yamaha Pages: 18
Yamaha RS-95 Assembling Instructions preview
RS-95
Brand: Yamaha Pages: 6
Yamaha RX-120 Operating Manual preview
RX-120
Brand: Yamaha Pages: 14
Yamaha RX-17 Service Manual preview
RX-17
Brand: Yamaha Pages: 20
Yamaha RX-17 Authorized Product Manual preview
RX-17
Brand: Yamaha Pages: 47
Yamaha RX-21L Owner'S Manual preview
RX-21L
Brand: Yamaha Pages: 49
Yamaha RX-15 Owner'S Manual preview
RX-15
Brand: Yamaha Pages: 48
Yamaha RXZ11BL Brochure preview
RXZ11BL
Brand: Yamaha Pages: 52
Yamaha RX-8 Operating Manual preview
RX-8
Brand: Yamaha Pages: 52
Yamaha TMX User Manual preview
TMX
Brand: Yamaha Pages: 60
Yamaha RX-7 Authorized Product Manual preview
RX-7
Brand: Yamaha Pages: 60

Brands by name

Popular brands

Load more brands