Editing a Performance
MOTIF XF Reference Manual
101
V
oice mode
Song mode
P
a
tt
er
n mode
Mixing mode
Mast
er mode
Utility mode
F
ile mode
P
erf
or
mance
mode
Sampling
mode 1
Sampling
mode 2
R
e
fe
rence
Convenient functions for editing
Performances
This is the same as in the Performance Play mode
(page 93).
This is the same in the Performance Play mode (page 93).
This is the same as in the Performance Play mode. See
page 96.
The Compare function lets you switch between the just-
edited Performance and its original, unedited condition,
allowing you to hear how your edits affect the sound.
1
In the Performance Edit mode, press the [EDIT]
button to call up the Compare mode.
In the Performance Edit mode (with the [EDIT] lamp lit),
press the [EDIT] button so that its lamp flashes. The [E]
indicator at the top right of the screen will change to the
[C] indicator and the Performance settings prior to
editing will temporarily be reinstated for comparison
purposes. When the [E] indicator is shown in the
Performance Play mode, press the [EDIT] button to
enter the Performance Edit mode then press the [EDIT]
button again to call up the Compare mode.
2
Press the [EDIT] button again to return to the
original status.
When the [C] indicator is shown at the right top of the
display, press the [EDIT] button (the lamp lights
continuously, and the [C] indicator changes back to the
[E] indicator).
Compare the edited sound with the unedited sound as
desired by repeating steps 1 and 2.
1
Press the [STORE] button to call up the
Performance Store window.
2
Set the destination for storing the
Performance.
Select a Performance Bank and Number as destination
by using the data dial, [INC/YES] and [DEC/NO]
buttons.
You can also use the [USER 1] – [USER 4], Group [A] –
[H], and Number [1] – [16] buttons to specify the
destination.
3
Press the [ENTER] button. (The display
prompts you for confirmation.)
To cancel the Store operation, press the [DEC/NO]
button.
4
To execute the Store operation, press the [INC/
YES] button.
After the Performance has been stored, a “Completed”
message appears and operation returns to the
Performance Play display.
NOTICE
When you execute the Store operation, the settings for the
destination memory will be overwritten. Important data should
always be saved to a USB storage device connected to the
USB TO DEVICE terminal or to a computer connected to the
same network as the MOTIF XF. For detailed instructions on
saving, see page 241.
Turning specific Parts on/off (Mute
function)
Soloing a specific Part
The [E] Indicator
Compare function
Compare indicator (sound prior to editing)
Storing the created Performance
