manualshive.com logo in svg

Yamaha MOTIF XF, Reference Manual

The Yamaha MOTIF XF is a powerful synthesizer workstation. Unlock its full potential with the comprehensive Owner's Manual, available for free download from 88.208.23.73:8080. This manual provides detailed instructions and insights to help you make the most of your MOTIF XF, enhancing your music production experience.

Share
Download
background image

Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)

MOTIF XF Reference Manual

196

V

oice mode

Song mode

P

a

tter

n mode

Mixing mode

Mast

er mode

Utility mode

F

ile mode

P

erf
or
mance

 mode

Sampling

 mode 1

Sampling

 mode 2

R

e

fe

rence

3

Part Parameters

Part 1 – 16

Mixing Part Edit settings (page 194) for Parts which are turned 
on are initialized. 

A/D (A/D Input)

This Part is input from the external audio equipment 
connected to the A/D INPUT jack. Parameter settings for the A/
D input Part (page 193) of Common Edit are initialized. 

FW

This Part is input from the external audio equipment 
connected to the IEEE1394 jack. When this is checkmarked, 
parameter settings for the FW Part (page 193) of Common Edit 
are initialized. 

n

The FW setting is available only when the optional FW16E 
is installed. 

4

Initialize selected Parts to GM

When this box is checked, executing the Job resets the 
selected Parts to standard GM tone generator settings. 
When the checkbox of All Parameters (

1

) is marked, all 

parameters will be reset to the GM settings. When the 
checkbox of All Parameters (

1

) is not marked, checked 

parameters (from Common, Part 1 – 16, AD and FW) will be 
reset to the GM settings. 

If you are editing a Song/Pattern Mixing program and 
select a different Song/Pattern without storing the one 
you’re editing, all the edits you’ve made will be erased. If 
this happens, you can use Recall function to restore the 
Mixing with your latest edits intact. 

Copying parameter settings from another 
Mixing (Copy Part)—[SF1] Part

This convenient operation lets you copy Common Edit and 
Part Edit settings of a certain Mixing to the currently edited 
Mixing. This is useful if you are creating a Mixing and wish 
to use some parameter settings from another Mixing. 

Source setup

1

In the Song mode: Song number
In the Pattern mode: Pattern number

Determines the source Mixing by selecting the Song 
number (Pattern number while in the Pattern mode). The 
name of the selected Song or Pattern is indicated at right. 
To select the current Mixing as source, enter the 
checkmark in the Current Mix checkbox.

2

Data type

Determines the source data type. 

Settings:

Common, Part 1 – 16, A/D, FW

n

The Insertion Effect Switch is a Part parameter. Therefore, the 
Insertion Effect Switch parameter settings are copied only 
when selecting one of the Parts 1 – 16. 

Destination setup

3

Currently edited Part

Determines the destination Part of the currently edited Mixing. 

Settings:

Common, Part 1 – 16, A/D, FW

Copying the Voice Common Edit settings to 
the Mixing (Copy Voice)—[SF2] Voice

This Job lets you copy the Common Edit effect settings of 
the Voice assigned to the specified Part to the current 
Mixing. This would come in handy when a certain Voice 
has effect settings that you want to use in your Mixing 
program. 

1

In the Song mode: Song number
In the Pattern mode: Pattern number, Section

Determines the Bank and the Mixing program number to 
be copied. The name of the selected Song or Pattern is 
indicated at right. If you wish to select the current Mixing as 
source, enter the checkmark in the Current Mix check box. 

2

Part number

Selects the Part (01 – 16) to which the source Voice is 
assigned. The name of the selected Song or Pattern is 
indicated at right.

3

Data type

Determines the source data type. By checking the 
appropriate box, the corresponding data settings are 
copied from the source Voice to the destination Mixing. The 
other parameter settings are not copied from the Voice to 
the current Mixing. 

[F2] Recall

Copying parameter settings from another 
Mixing, Voice and Performance—[F3] Copy

1

2

3

1

3

2

Summary of Contents for MOTIF XF
































































































































































































































































Reviews:

No comments

Related manuals for MOTIF XF

Nabla Instruments MiniP7 Assembly And User'S Manual preview
MiniP7
Brand: Nabla Instruments Pages: 18
Suzuki CTB-01 Owner'S Manual preview
CTB-01
Brand: Suzuki Pages: 2
Roland Drum Throne DT-30 Owner'S Manual preview
Drum Throne DT-30
Brand: Roland Pages: 2
Onboard Research Model RA800P User Manual preview
Model RA800P
Brand: Onboard Research Pages: 27
DBDrums jaguar master User Manual preview
jaguar master
Brand: DBDrums Pages: 8
Yamaha MTS-810B Owner'S Manual preview
MTS-810B
Brand: Yamaha Pages: 36
Ashton EDP420 User Manual preview
EDP420
Brand: Ashton Pages: 18
Medisana HP 625 Comfort Instruction Manual preview
HP 625 Comfort
Brand: Medisana Pages: 86
Aroma TDX-25 II User Manual preview
TDX-25 II
Brand: Aroma Pages: 34
Pearl Red Box RBM 20 Owner'S Manual preview
Red Box RBM 20
Brand: Pearl Pages: 44

Brands by name

Popular brands

Load more brands