Playing in the Performance Mode
MOTIF XF Reference Manual
95
V
oice mode
Song mode
P
a
tt
er
n mode
Mixing mode
Mast
er mode
Utility mode
F
ile mode
P
erf
or
mance
mode
Sampling
mode 1
Sampling
mode 2
R
e
fe
rence
2
Change the tonal color.
Moving the Knobs changes various aspects of the
Voice’s sound in real time—while you play.
When one of the TONE 1, TONE 2 or ARP FX lamps are
lit, the eight Knobs are used to control the
corresponding functions as printed on the panel (the
same as in the Voice mode). For details, see page 46.
When one of the REVERB, CHORUS or PAN lamps are
lit, the following functions are assigned to the four
leftmost Knobs.
n
If the [E] (Edit) indicator appears at the top right of the
display when you adjust the Knobs, the current
Performance can be stored (page 101) as a new User
Performance.
Using Sliders
The far left four sliders adjust the volume for each of four
Parts. Each of the Control Sliders 1 – 4 corresponds to the
same numbered Part. The status of the sliders is shown on
the display.
The Performance Play display—[F1]
Play
You can call up the Performance Play display by pressing
the [PERFORM] button.
Type 1 of the Performance Play display
1
Performance Bank
2
Performance Number (Group/Number)
Indicates the Bank and Number of the selected
Performance. A Bank is a memory location that includes
data of 128 different Performances. Four Banks (User 1 –
4) are provided. Each Performance within a Bank is
assigned to a Performance Number of 001 to 128.
Performance Numbers 001 to 128 are converted to the
format (shown in parentheses) of Banks A to H and
Numbers 1 to 16 (for the Bank). This format corresponds to
the Group buttons [A] – [H] and the Number buttons [1] –
[16]. The Performance Numbers and the corresponding
Group/Numbers are listed below.
Active lamp
Functions of the left four knobs
REVERB
Adjusts the reverb depth for Parts 1 – 4
CHORUS
Adjusts the chorus depth for Parts 1 – 4
PAN
Adjusts the pan position for Parts 1 – 4
Changing a Part to be controlled
You can change a Part to be controlled by Knob
operations via the following instructions.
1
Turn the [PERFORMANCE CONTROL]
lamp on by pressing the [SELECTED PART
CONTROL] button to call up the Control
Function window.
2
Select the desired Part by pressing the [1]
– [4] buttons and [COMMON EDIT] button.
By pressing the [COMMON EDIT] button, Knob
operations except for “ASSIGN 1” and “ASSIGN 2”
will be applied to all four Parts. By pressing the
one of the [1] – [4] buttons, Knob operations will
be applied only to the selected Part.
n
If the Control Function window cannot be called up
(from some display) and you wish to change a Part,
press the [PERFORMANCE CONTROL] button (the
lamp lights), then press one of the [1] – [4] and
[COMMON EDIT] buttons.
Group/Number
Performance Number
A01 – 16
001 – 016
B01 – 16
017 – 032
C01 – 16
033 – 048
D01 – 16
049 – 064
E01 – 16
065 – 080
F01 – 16
081 – 096
G01 – 16
097 – 112
H01 – 16
113 – 128
3
1
2
5
6
^
4
3
1
2
5
6
^
4
7
8
8
*
&
9
!
@
#
$
%
)
9
!
@
#
$
%
)
Type 2 of the Performance Play display
