MOX6/MOX8 Reference Manual
Song Mode
77
7
(Tempo)
Determines the Song playback tempo.
Settings:
5.0 – 300.0
NOTE
If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with
that device, set the “MIDI Sync” parameter in the Utility MIDI display (
) to “external” or “auto.” When “MIDI Sync” is set
to “auto” (only when MIDI clock is transmitted continuously) or “external,” the Tempo parameter here indicates “external” and
cannot be changed.
NOTE
This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the
desired tempo. This function is referred to as “Tap Tempo.”
8
MEAS (Measure)
Determines the location at which playback starts. This also indicates the current location of playback.
9
SCN1 (Scene 1) – [SF6] SCN6 (Scene 6)
You can assign the settings of the Song-related parameters (Song Scene) and the Arpeggio-related parameters to these
buttons. You can also recall the settings by pressing these buttons. For detailed instructions on registering Scenes, see
the “Assigning various settings related to Song playback (Song Scene)” on
. For detailed instructions on setting
the Arpeggio-related parameters, see
.
NOTE
Pressing the [SF1] SCN1 – [SF6] SCN6 during playback changes only the Song Scene.
NOTE
After registering the Song Scene, the 8th note icon will appear on the tab corresponding to the pressed button. You can confirm
whether the Arpeggio Type is assigned to that button in the Arpeggio Edit display (
) of the Song mode.
The Grid Groove function makes it possible to adjust the pitch, timing, length, and velocity of notes in a specified Track
via a 1-measure 16th-note grid to create “grooves” with precise sequencer-like programming, which would not
otherwise be possible. The Grid Groove function affects Song playback without actually changing the sequence data.
NOTE OFST (Note Offset)
Raises or lowers the pitch of the note(s) on the selected grid in semitones.
Settings:
-99 – +00 – +99
CLOCK SFT (Clock Shift)
Shifts the timing of the note(s) on the selected grid forward or backward in clock increments.
Settings:
-120 – +000 – +120
GATE OFFSET (Gate Time Offset)
Lengthens or shortens the note(s) on the selected grid in clock increments.
Settings:
-120 – +000 – +120
VELO OFST (Velocity Offset)
Increases or decreases the velocity of the note(s) on the selected grid.
Settings:
-127 – +000 – +127
[F2] GROOVE (Grid Groove)
+
0
–
NOTE OFST (Note Offset)
CLOCK SFT (Clock Shift)
GATE OFFSET (Gate Time Offset)
VELO OFST (Velocity Offset)
