MOX6/MOX8 Reference Manual
Song Mode
95
Pressing this calls up the selected Job display.
01: Copy Track
This Job copies all data of the selected type from a specified
source Track to a specified destination Track.
NOTICE
The copy operation overwrites any data previously existing on
the destination Track.
Data type to be copied
Determines the type(s) of data to be copied. Select the
desired type by check-marking the appropriate box.
Settings:
Seq Event (all events in the Track), Grid Groove (for the selected Track), Mix Part Param (all Mixing Part parameters)
02: Exchange Track
This Job exchanges or “swaps” the specified type of data
between two specified Tracks in the current Song.
Data Type to be exchanged
Determines the type(s) of data to be exchanged. Select the
desired type by check-marking the appropriate box.
Settings:
Seq Event (all events in the Track), Grid Groove (for the
selected Track), Mix Part Param (all Mixing Part
parameters)
03: Mix Track
This job mixes all data from two selected Tracks (“A” and “B”), and places the result in Track B.
Target Tracks for the Mix operation
Settings:
01 – 16
04: Clear Track
This Job deletes all data of the selected type from the selected
Pattern Track.
Data type to be cleared
Determines the type(s) of data to be cleared. Select the desired
type by check-marking the appropriate box.
Settings:
Seq Event (all events in the Track), Grid Groove (for the
selected Track), Mix Part Param (all Mixing Part parameters)
[F5] TRACK (Track Job)
Data type to be copied
Source Song and
Track (01 – 16)
Destination Song
and Track (01 – 16)
Target Tracks for the Exchange operation (01 – 16)
Data Type to be exchanged
Track A (01 – 16)
Track B (01 – 16)
Track A
Track B
Track B
Mix Track
Track for which data will be cleared (01 – 16, TMP, SCN, all)
Data type to be cleared