MOXF6/MOXF8 Owner’s Manual
Control and Functions
13
%
TRANSPOSE [-] and [+] buttons (page 27)
Use these buttons to raise or lower the pitch of the note in
semitone steps. To restore the normal octave setting, press
both buttons simultaneously.
^
EFFECT buttons
The extensive effect block of the instrument provides Insertion
Effects (eight sets), System Effects (Reverb and Chorus),
and Master Effects. The effects can be applied to the
keyboard played Voices and to Song/Pattern playback.
When the lamp of the [INSERTION], [SYSTEM] or [MASTER]
button is turned on, the corresponding Effect is available.
NOTE
When the Reverb/Chorus of the “SystemFXOn/OffBtn” parameter
is set to off in the [UTILITY]
[F1] GENERAL
[SF1] TG
display, the Reverb/Chorus will not function even if the EFFECT
[SYSTEM] button is turned off.
&
ARP [ON/OFF] button (page 27)
Press this button to enable or disable playback of the
Arpeggio for each Voice, Performance, Song, or Pattern. If
the Arpeggio Switch of the selected Part is set to off in the
Performance/Song/Pattern mode, however, pressing this
button has no effect.
*
ARP [EDIT] button (page 31)
Press this button to call up the Arpeggio Edit display of the
Voice/Performance /Song/Pattern mode. When the Arpeggio
Edit display is shown with the [E] (Edit indicator) called up
by editing a parameter, press the ARP [EDIT] button (the
lamp flashes) to call up the Compare status. This restores
the original, unedited setting. In the Compare status, the [E]
indication is replaced by [C]. Press the ARP [EDIT] button
again to exit from the Compare status.
(
[DAW REMOTE] button (page 55)
Turn on this button to enter the Remote mode. The Remote
mode lets you control DAW software on your computer from
the panel controls of the instrument.
A
SEQ TRANSPORT button (page 19)
These buttons control recording and playback of the Song/
Pattern sequence data.
[
P
] (Top) button
Instantly returns to the beginning of the current Song or
Pattern (i.e., the first beat of the first measure).
[
G
] (Reverse) button
Press briefly to move back one measure at a time, or
hold to continuously rewind.
[
H
] (Forward) button
Press briefly to move forward one measure at a time, or
hold to continuously fast-forward.
[REC] (Record) button
Press this to enable recording (Song or Pattern phrase).
(The indicator lights.)
[
J
] (Stop) button
Press to stop recording or playback.
[
F
] (Play) button
Press to start playback/recording from the current point
in the Song or Pattern. During recording and playback,
the indicator flashes at the current tempo.
B
LCD (Liquid Crystal Display)
The backlit LCD indicates the parameters and values related
to the currently selected operation or mode.
C
[F1] – [F6] (Function) buttons (page 21)
These buttons located directly below the LCD call up the
corresponding functions indicated in the display.
D
[SF1] – [SF6] (Sub Function) buttons
(page 21)
These buttons located directly below the display call up the
corresponding sub functions indicated in the display. These
buttons can be also used to call up different Arpeggio types
in some displays of the Play mode and Record mode
(page 27). These buttons can be also used as Song Scene
buttons in Song Play/Song Record (see the “Reference
Manual” PDF document).
B
D
C
Summary of Contents for MOXF6
Page 1: ...Owner s Manual EN...
Page 76: ...76 MOXF6 MOXF8 Owner s Manual Memo...
Page 77: ...MOXF6 MOXF8 Owner s Manual 77 Memo...
Page 78: ......
