MOXF6/MOXF8 Owner’s Manual
Quick Guide
37
3
Press the [REC] button to call up the Performance
Record mode.
4
Set the following parameters on each of the
Performance Record displays.
[F1] SETUP display
1
“SeqMode” = “song”
This setting lets you record your keyboard performance
to the Song.
2
“Number”
Select a destination Song. Executing Performance
recording overwrites and erases all the previously
recorded data of the specified Song. Make sure to select
a Song which contains no data.
3
“TimeSignature” = “4/4”
Set the same value here as that of the Arpeggio type.
Normally, set this to “4/4.”
4
“Tempo”
Set the desired tempo of the metronome and Arpeggio
for recording.
[F2] REC TR display
5
“RecTrack”
Select the destination Tracks from “1 – 4,” “5 – 8,” “9 – 12,”
and “13 – 16.”
[F3] OTHER display
6
“KeyOnStart” = “on”
When set to “on,” recording starts immediately when you
press any note on the keyboard. Set this parameter to “on”
when using the Arpeggio.
7
“CopyPerfParam” = “on”
Set this to “on” when you wish to copy the parameter
settings for the Performance Parts 1 – 4 to the destination
Parts of the Song.
8
“MoveToRecMode” = “on”
Set this to “on” when you wish to move to the Song mode
(specified via the SeqMode) after recording ends.
[F5] CLICK
9
(click on)
Press the [F5] button to turn the metronome on if you wish
to use the metronome.
5
Press any note to start recording.
Play the keyboard in time with the metronome. You can
change the Arpeggio type and settings by pressing any of
the [SF1] – [SF6] buttons while recording.
6
Press the [
J
] (Stop) button to stop recording.
Recording stops and the instrument enters the Song mode.
After recording, the created data will be automatically stored
to internal Song/Pattern memory. Press the [
F
] button to
hear your newly recorded performance.
Record your keyboard performance to additional Tracks in
Song Record as desired, and edit the recorded data in the
Song Edit or Song Job to finalize the Song data.
NOTE
Regarding Arpeggios, not only the played notes but also all
note events of Arpeggio playback will be recorded.
7
After completing, press the [STORE] button to
store the Song.
Recording Arpeggio playback to a
Pattern
If you record your keyboard playing along with Arpeggio
playback in the Performance mode to a Pattern, you can
quickly create full and complete rhythm patterns lasting just
a few measures. These short Patterns of MIDI sequence
data can be played back repeatedly in a loop and then
conveniently used as ‘building blocks’ for your original
Songs.
The Performance Recording to a Pattern operation is the
almost same as that of Recording to a Song, with the
exception of the settings below.
In the Performance Record display, set the “Section” and
“SectionLength” as well as the same settings as in
“Recording the melody and Arpeggio playback to the Song.”
1
2
3
4
5
6
7
8
9
Summary of Contents for MOXF6
Page 1: ...Owner s Manual EN...
Page 76: ...76 MOXF6 MOXF8 Owner s Manual Memo...
Page 77: ...MOXF6 MOXF8 Owner s Manual 77 Memo...
Page 78: ......
