MOXF6/MOXF8 Owner’s Manual
Quick Guide
59
Reversing the LCD status
[F1] GENERAL
[SF6] OTHER
Cursor [<] button
“LCD Mode”
This parameter determines the LCD status.
You can use the Master mode to memorize the settings you
use most often.
Click (metronome) settings
[F2] SEQ
[SF1] CLICK
Determines the tempo, volume and output destination of the
click (metronome).
Effect settings applied to the signal
input from the A/D INPUT jack
[F3] VCE A/D
Determines the settings for the effects applied to the
incoming audio signal from the A/D INPUT [L]/[R] jacks in
the Voice mode.
Master Effect/Master EQ settings
in the Voice mode
[F2] VOICE
[SF1] MFX, [SF2] MEQ
Determines how much of the Effect and EQ processing is
applied to the master output.
Transmitting Control Change
messages using the Foot Switch
[F4] CTL ASN
[SF2] FT SW
You can transmit Control Change messages using the Foot
Switch connected to the [ASSIGNABLE] jack. For example,
when you set the value to 98 [PC Inc], the Program Change
number increases by 1 whenever the Foot Switch is pressed.
When “normal” is selected:
When “reverse” is selected:
Summary of Contents for MOXF6
Page 1: ...Owner s Manual EN...
Page 76: ...76 MOXF6 MOXF8 Owner s Manual Memo...
Page 77: ...MOXF6 MOXF8 Owner s Manual 77 Memo...
Page 78: ......