64
MOXF6/MOXF8 Owner’s Manual
Appendix
Now Installing data to Flash
Memory Module
The Sample data is being copied to the Flash Memory Expansion Module.
Now loading...
Indicates that a file is being loaded.
Now saving...
Indicates that a file is being saved.
Now working...
Canceling the Load/Save operation, after the [EXIT] button has been pressed.
Overwrite?
A save operation will overwrite data on the USB flash memory device, and this message confirms whether it is OK to
continue or not.
Part ** is used for Drum
Assign.
This message appears when the Part switches of all Parts are set to on, and the Drum Assign function uses Part ** for the
Drum Part in Performance mode. The ** mark indicates the Part number.
Part ** is used for Layer.
This message appears when the Part switches of all Parts are set to on, and the Layer function uses Part ** for the Layer
Part in the Performance mode. The ** mark indicates the Part number.
Part ** is used for Split.
This message appears when the Part switches of all Parts are set to on, and the Split function uses Part ** for the Split Part
in the Performance mode. The ** mark indicates the Part number.
Phrase limit exceeded.
The maximum number of Phrases (256) has been exceeded when recording, executing a Pattern Job, or editing.
Please keep power on.
The data is being written to Flash ROM. Never attempt to turn off the power while data is being written to Flash ROM.
Turning the power off while this message is shown results in loss of all user data and may cause the system to freeze (due
to corruption of data in the Flash ROM). This may also result in this instrument being unable to properly start up the next
time the power is turned on.
Please reboot.
Please restart this instrument.
Please stop sequencer.
The operation you have attempted to execute cannot be done during Song/Pattern playback.
Power on mode stored.
The settings in the Power On mode (pressing the [STORE] and [ENTER] buttons simultaneously) have been stored.
Quick Setup ** applied.
Quick Setup ** has just been applied to this instrument. The ** mark indicates the Quick Setup number.
Read only file.
You have attempted to delete, rename, or overwrite a read-only file.
Receiving MIDI bulk
This instrument is receiving MIDI bulk data.
Sample is too long.
The Sample size is too large and the load operation cannot be executed.
Sample full.
The maximum overall number of Samples has been exceeded.
Sample memory full.
The Sample memory is full and further Jobs or load operations cannot be executed.
Scene & Arpeggio type
stored
The Song Scene and current Arpeggio type have been stored to one of the [SF1] – [SF6] buttons.
Sequence memory full.
The internal memory for Sequence data is full, preventing any further operation (such as recording, editing, Job execution,
MIDI reception/transmission, or loading from the external storage device). Try again after erasing unwanted Song, Pattern,
or User Phrase data.
Too many fixed notes
When converting the Song or Pattern data to the Arpeggio data, the amount of different notes in the data to be converted
has exceeded sixteen.
Transmitting MIDI bulk
This instrument is transmitting MIDI bulk data.
Unrecognized Flash
Memory Module. Please
format that.
An unformatted Flash Memory Expansion Module has been recognized. Execute the Format operation.
USB connection terminated.
A break in the connection with the USB flash memory device has occurred because of an abnormal electric current.
Disconnect the device from the USB [TO DEVICE] terminal, then press the [ENTER] button.
USB device connecting
Currently recognizing the USB flash memory device connected to the USB [TO DEVICE] terminal.
USB device full.
The USB flash memory device is full and no more data can be saved. Use a new USB flash memory device, or make
space by erasing unwanted data from the USB flash memory device.
USB device not ready.
A USB flash memory device is not properly inserted in or connected to the USB [TO DEVICE] terminal.
USB device read/write error.
An error occurred while reading or writing to/from a USB flash memory device.
USB device write protected.
The USB flash memory device is write protected, or you have attempted to write to read-only media.
Utility stored
The settings in the Utility mode have been stored.
Waveform full.
The maximum overall number of Waveforms has been exceeded.
Waveform is protected.
You have attempted to load protected Waveform data.
LCD indication
Description
Summary of Contents for MOXF6
Page 1: ...Owner s Manual EN...
Page 76: ...76 MOXF6 MOXF8 Owner s Manual Memo...
Page 77: ...MOXF6 MOXF8 Owner s Manual 77 Memo...
Page 78: ......
