MOXF6/MOXF8 Owner’s Manual
Quick Guide
58
Making settings for use as a master
keyboard
It is a good idea to memorize master keyboard functions to
the Master when using external multiple MIDI tone generators.
Simply by selecting a different Master, you can change the
programs in your connected external MIDI tone generators.
Here's how to do it:
1
Press the [MASTER] button to enter the Master
mode.
2
Select a Master to be edited.
3
Press the [F3] ZONE SW button.
The ZONE SW display appears.
4
Set “ZoneSwitch” to “on.”
NOTE
When the “ZoneKnob” is set to “on,” the Zone Edit settings
are assigned to Knobs 1 – 8. If you want to assign the
settings in the memorized mode to Knobs 1 – 8 yourself, set
“ZoneKnob” to “off.“
5
Press the [EDIT] button, and then press the
Number [1] button.
This calls up the Master Edit displays for Zone 1.
6
Set the parameters for Zone 1 in the [F1] – [F5]
displays.
7
Use the Number [2] – [4] buttons to set the
parameters for other Zones as well as Zone 1.
8
After setting all the desired parameters, press the
[STORE] button to store your settings as a Master
program.
After completing these settings, assign a name to the Master
in the [F1] Name display of the Master Common Edit. After
naming, press the [STORE] button to store the Master.
For more information on the parameters which are edited in
the Master mode, see the “Reference Manual” PDF document.
Making Global System
Settings (Utility Mode)
In the Utility mode, you can set parameters that apply to the
entire system of this instrument. To enter the Utility mode,
press the [UTILITY] button. Pressing the [EXIT] button returns
to the original display.
This section describes some useful functions in the Utility
mode.
Setting the default mode when
turning the power on
[F1] GENERAL
[SF6] OTHER
Cursor [>] button
“PowerOnMode”
Determines which mode is automatically called up when
turning the power on.
When this is set to “STORE+ENTER,” the display in which
you specify the mode (Voice/Performance/Master/Song/
Pattern) and the Program number will automatically be
called up when the power is turned on.
To specify a display, call it up normally, then press the
[STORE] button and the [ENTER] button simultaneously.
Summary of Contents for MOXF6
Page 1: ...Owner s Manual EN...
Page 76: ...76 MOXF6 MOXF8 Owner s Manual Memo...
Page 77: ...MOXF6 MOXF8 Owner s Manual 77 Memo...
Page 78: ......
