MOXF6/MOXF8 Reference Manual
Mixing Mode
120
Mixing Job
The Performance Job features several basic operations, such as Initialize and Copy. After setting parameters as
required in the selected display, press the [ENTER] button to execute the Job.
Resets (initializes) all Mixing parameters to their default settings. It also allows you to selectively initialize certain
parameters, such as Common settings, settings for each Part, and so on—very useful when creating a completely new
Performance from scratch.
Type of parameter to be initialized:
GM, All, Common (Common parameter settings for the selected Mixing), Part 1 – 16, A/D (A/D input part)
If you are editing a Mixing program and select a different program without storing your edited one, all the edits you’ve
made will be erased. If this happens, you can use Edit Recall to restore the Mixing program with your latest edits intact.
[SF1] PART
From this display you can copy Part parameter settings from any Mixing program including the currently edited (but not
yet stored) one to a particular Part of the Mixing program you are editing. This would come in handy when you want to
use some settings from another program. The procedure is basically the same as in the [F3] COPY display in the
Performance Job. See
.
[SF2] VOICE
This Job lets you copy the settings of the Voice Common Edit to the current Mixing. This would come in handy when a
certain Voice has effect settings that you want to use in your Mixing program. You can check the appropriate check
boxes for the desired settings of the Reverb Effect, Chorus Effect, Master Effect, and Master EQ to execute this job.
NOTE
Mixing Voices cannot be selected as source Voices.
Operation
[SONG]/[PATTERN]
Song/Pattern selection
[MIXING]
[JOB]
[F1] INIT (Initialize)
[F2] RECALL (Edit Recall)
[F3] COPY
Source Song and Part
Destination Song (current Song) and Part
