MOXF6/MOXF8 Reference Manual
Voice Mode
49
[SF4] OTHER
From this display you can set various parameters related to how the individual notes of the Drum voice respond to the
keyboard and MIDI data.
AssignMode
Determines the playing method when the same notes are received continuously over the same channel, and without a
corresponding note off message. For details on settings, see the “Synthesizer Parameter Manual” PDF document.
Settings:
single, multi
RcvNoteOff (Receive Note Off)
Select whether MIDI Note Off messages are received by each Drum Key.
Settings:
off, on
AltnateGroup (Alternate Group)
Set the Alternate Group to which the key is assigned. This setting helps to reproduce the sounds of a real drum kit, in
which some drum sounds cannot physically be played simultaneously, such as open and closed hi-hats.
Settings:
off, 1 – 127
[SF6] HOLD
In the Key Edit displays, the desired Drum Key can be changed by pressing a key on the keyboard. When setting this
[SF6] HOLD to on (
), the desired Drum Key is maintained even when pressing any other keys on the keyboard.
When setting the [SF6] HOLD to off (
), the desired Drum Key can be changed by pressing another key on the
keyboard.
[SF1] TUNE
From this display you can set various pitch-related parameters for the selected key.
Coarse (Coarse Tuning)
Determines the pitch of each Drum Key Wave in semitones.
Settings:
-48 – +0 – +48
Fine (Fine Tuning)
Determines the fine tuning for the pitch of each Drum Key Wave.
Settings:
-64 – +0 – +63
[SF2] VEL SENS (Velocity Sensitivity)
Pitch (Pitch Velocity Sensitivity)
Determines how the pitch of the selected Drum key responds to velocity.
Settings:
-64 – +0 – +63
[F2] PITCH
