MOXF6/MOXF8 Reference Manual
Performance Mode
62
[SF6] INFO (Information)
Indicates the setting information for direct monitor switch, the output mode for the audio signal, and other information.
This display sets parameters related to the input from the A/D INPUT [L]/[R] jacks.
[SF1] OUTPUT
Volume
Determines the output level of the A/D input part.
Settings:
0 – 127
Pan
Determines the stereo pan position of the A/D input part.
Settings:
L63 (far left) – C (center) – R63 (far right)
Chorus Send
Determines the Send level of the Audio input part signal sent to the Chorus effect. The higher the value, the more
pronounced the Chorus.
Settings:
0 – 127
Reverb Send
Determines the Send level of the Audio input part signal sent to the Reverb effect. Higher values produce a more
pronounced Reverb sound.
Settings:
0 – 127
Dry Level
Determines the level of the A/D input part which has not been processed with the System Effect (Chorus, Reverb).
Settings:
0 – 127
Mono/Stereo
Determines the signal configuration for the A/D input part, or how the signal or signals are routed (stereo or mono).
Settings:
LMono, RMono, LRMono, stereo
LMono...................................... Only the L channel of the audio input is used.
RMono ..................................... Only the R channel of the audio input is used.
LRMono ................................... The L and R channels of the audio input are mixed and processed in mono.
stereo....................................... Both the L and R channels of the audio input are used.
[SF2] CONNECT (Insertion Effect Connection)
From this display, you can set the Insertion Effect Types applied to the Audio Input signal in the Performance mode. The
System Effect can be set in the EFFECT display (
).
1
InsA Ctgry (Insertion Effect A Category)/ InsB Ctgry (Insertion Effect B Category)
2
InsA Type (Insertion Effect A Type)/ InsB Type (Insertion Effect B Type)
Determines the category and type for the Insertion Effect A/B.
Settings:
For details on the editable Effect categories and types, see the “Data List” PDF document. Also, for details on the description
for each Effect type, see the “Synthesizer Parameter Manual” PDF document.
[F5] A/D IN (A/D Input)
1
1
2 3
2
