8-36
IMMOBILIZER SYSTEM
Fault
Part Symptom
Cause
Action
code
51
IMMOBILIZER
Code cannot be
1. Radio wave
1. Keep magnets,
UNIT
transmitted between
interference caused
metal objects,
the key and the
by objects around the
and other
immobilizer unit.
keys and antenna.
immobilizer
2. Immobilizer unit
system keys
malfunction.
away from the
3. Key malfunction.
keys and
antennas.
2. Replace the
main switch/
immobilizer unit.
3. Replace the key.
52
IMMOBILIZER
Codes between the
1. Signal received from
1. Place the
UNIT
key and immobilizer
other transponder
immobilizer unit
unit do not match.
(failed to recognize
at least 50 mm
code after ten
away from the
consecutive attempts).
transponder of
2. Signal received from
other vehicles.
unregistered
2. Register the
standard key.
standard key.
53
IMMOBILIZER
Codes cannot be
Noise interference or
1. Check the wire
UNIT
transmitted between
disconnected
harness and
the ECU and the
lead/cable.
connector.
immobilizer unit.
1. Interference due to
2. Replace the
radio wave noise.
main switch/
2. Disconnected
immobilizer unit.
communication
3. Replace the
harness.
ECU.
3. Immobilizer unit
malfunction.
4. ECU malfunction.
54
IMMOBILIZER
Codes transmitted
Noise interference or
1. Register the
UNIT
between the ECU
disconnected
code re-registering
and the immobilizer
lead/cable.
key.
unit do not match.
1. Interference due to
2. Check the wire
radio wave noise.
harness and
2. Disconnected
connector.
communication 3. Replace
the
harness.
main switch/
3. Immobilizer unit
immobilizer unit.
malfunction.
4. Replace the
4. ECU failure.
ECU.
(The ECU or
immobilizer unit was
replaced with a used
unit from another
vehicle.)
EAS27720
SELF-DIAGNOSIS FAULT CODE INDICATION
When a system malfunction occurs, the fault code number is signaled by the immobilizer system in-
dicator light.
Summary of Contents for MT-03
