Instrument and control functions
5-27
1
2
3
4
5
6
7
8
9
10
11
12
13
“Grip Warmer Setting” (if equipped)
This module is for adjusting the temper-
ature values for the grip warmer pre-
sets (LO/MIDDLE/HIGH). Each preset
can be set from 1 (low heat) to 10 (high
heat).
“Clock”
This module allows you to set the clock.
“All Reset”
This module resets everything, except
the odometer and clock, to its factory
preset or default setting.
Select YES to reset all items. After se-
lecting YES, all items will be reset and
the screen will automatically return to
the MENU screen.
EAU12823
Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 7-3.)
EAU83692
Shift pedal
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move the
shift pedal up. To shift the transmission
to a lower gear, move the shift pedal
down. (See page 7-3.)
The shift rod is equipped with a shift
sensor, which is part of the quick shift-
er. The shift sensor reads up and down
movement, as well as the strength of
the input force when the shift pedal is
moved.
TIP
To prevent unintended shifts, the quick
1. Clutch lever
1
1. Shift pedal
2. Shift sensor
1
1
1
1
2
2
BGG-9-10-E0.book 27 ページ ２０２２年１月２６日 水曜日 午前１１時３７分
