For your safety – pre-operation checks
6-2
1
2
3
4
5
6
7
8
9
10
11
12
13
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
Throttle grip
• Check for smooth rotation and automatic return.
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
ITEM
CHECKS
PAGE
BGG-9-10-E0.book 2 ページ ２０２２年１月２６日 水曜日 午前１１時３７分
