![background image](http://html1.mh-extra.com/html/yamaha/mtx-series/mtx-series_setup-manual_3208518076.webp)
Example 3) Using cascade mode to add MTX input channels (analog connection)
MTX Setup Manual
76
ID=01
ID=02
If you store these settings as a different preset, you’ll be able to easily switch to settings with a limited number of
microphones. In the example above, wireless microphones 9 through 11 are not used, so FBS is used on all of the wire-
less microphones (1 through 8) that are being used.
This completes settings in the offline state. Save the settings once again.