Wired network connections
To use a wired network connection, connect the unit to a router via
an STP network cable (category 5 or higher straight cable; sold
separately).
LAN
WAN
Internet
Network Attached Storage
(NAS)
Mobile device
Computer
Modem
Network cable
Router
NOTE
If network connections or settings are changed, use the MusicCast CONTROLLER
app to connect the unit to a network and register the unit as a MusicCast-enabled
device again (p.22).
Wireless network connections
Connect the unit to a wireless router (access point) to use a
network.
See the following for instructions on connecting to a wireless router
(access point).
• “Connecting with the MusicCast CONTROLLER app (registering
the unit as a MusicCast-enabled device)” (p.22)
• “Connecting to a network using the WAC function” (p.48)
Internet
Mobile device
Wireless router (access point)
Modem
The
*
indicator on the unit glows when the unit is connected to a
wireless network.
Glows
NOTE
If the unit and the wireless router (access point) are too far apart, the unit may not
connect to a wireless router (access point). In such case, place them close to each
other.
En
21
