PLAYBACK
➤
Operations
En
13
PLAYBACK
Operations
1
Remote control signal transmitter
Transmits infrared signals.
z
(power) button
Turns on or off the unit.
Center unit
Turned on
Turned off/network standby
Subwoofer
Turned on
Turned off/network standby
NOTE
• When the unit is turned on for the first time after purchase,
the
*
indicator on the center unit flashes slowly.
While the
*
indicator is flashing, network settings from your
iOS device (an iPhone, etc.) can be applied to the unit to
connect the unit to a wireless network. For details on
settings, see “Connecting to a network using the WAC
function” in the Owner’s Manual. Press any button on the
remote control to cancel this function if it will not be used.
The
*
indicator does not flash if the unit’s NETWORK jack
is connected to a router using a cable (wired connection).
The indicator for the last input
source selected glows.
Indicates the surround setting, and network or
Bluetooth connection status.
Off
Glows
Glows
1
