MW8CX/MW10C Owner’s Manual
6
1
Be sure that the mixer’s power switch is in the
STANDBY position.
Use only the included power adaptor (PA-10) or
an equivalent recommended by Yamaha. Use of a
different adaptor may result in equipment dam-
age, overheating, or fire.
2
Connect the power adaptor to the AC ADAPTOR IN
connector (
q
) on the rear of the mixer, and then
turn the fastening ring clockwise (
w
) to secure the
connection.
3
Plug the power adaptor into a standard household
power outlet.
• Be sure to unplug the adaptor from the outlet
when not using the mixer, or when there are
lightning storms in the area.
• To avoid generating unwanted noise, make
sure there is 50 cm or more between the power
adaptor and the mixer.
Press the mixer’s power switch to the ON position.
When you are ready to turn the power off, press the
power switch to the STANDBY position.
Note that trace current continues to flow while the
switch is in the STANDBY position. If you do not plan
to use the mixer again for a long while, please be sure
to unplug the adaptor from the wall outlet.
To prevent loud pops and noises, turn on the power to
your sound gear starting with the sources (instruments,
CD players, etc.) and ending with the power amplifier or
powered speakers.
Example : Instruments, microphones, and CD players
first, then the mixer, and finally the power
amplifier or powered speakers.
When turning off the power to the system, reverse the
order described above.
Windows Vista
Windows XP
Macintosh
Windows
Macintosh
• A DVD driver is required for installation.
• To activate your software license, install the application
while the computer is connected to the internet.
Before Turning on the Mixer
Turning the Power On/OFF
CAUTION
q
w
CAUTION
CAUTION
NOTE
Computer System Requirements
Computer
Windows-based computer with built-in USB inter-
face
OS
Windows Vista
CPU
1 GHz or higher Intel Core/Pentium/Celeron proces-
sor
Memory
1 GB or more
Computer
Windows-based computer with built-in USB inter-
face
OS
Windows XP Professional/XP Home Edition
CPU
750 MHz or higher Intel Core/Pentium/Celeron pro-
cessor
Memory
96 MB or more (128 MB or more recommended)
Computer
Macintosh computer with built-in USB interface
OS
MacOS X 10.3.3 or higher
CPU
Macintosh G3 300 MHz or higher/Intel processor
Memory
128 MB or more
Cubase AI4 System Require-
ments
OS
Windows XP Professional/XP Home Edition
CPU
1.4 GHz or higher Intel Pentium processor
Memory
512 MB or more
Audio
Interface
Windows DirectX compatible
Hard Disk
400 MB or more
OS
MacOS X 10.4 or higher
CPU
Power Mac G4 1 GHz/Core Solo 1.5 GHz or higher
Memory
512 MB or more
Hard Disk
400 MB or more
NOTE
