Perio
d
ic maintenance an
d
a
d
justment
7-6
7
10
*
Wheels
• Check runout and for damage.
√
√
√
√
• Balance the front wheels.
Whenever the tires or wheels have been changed or replaced
11
*
Tires
• Check tread depth and for dam-
age.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√
√
√
√
√
12
*
Wheel
b
earin
g
s
• Check bearings for looseness or
damage.
√
√
√
√
13
*
Steerin
g
system
• Check bearing play and steering
for roughness.
√
√
√
√
√
• Lubricate with lithium-soap-
based grease.
Every 24000 km (14000 mi)
• Check steering tie rod, and re-
place if necessary.
√
√
√
√
√
14
*
Leanin
g
system
• Check bearing play.
√
√
√
√
√
15
*
Chassis fasteners
• Make sure that all nuts, bolts and
screws are properly tightened.
√
√
√
√
√
16
Front
b
rake lever
pivot shaft
• Lubricate with silicone grease.
√
√
√
√
√
17
Rear
b
rake lever
pivot shaft
• Lubricate with silicone grease.
√
√
√
√
√
18
*
Unifie
d
b
rake sys-
tem
• Lubricate link pivots and moving
parts with silicone grease.
√
√
√
√
√
• Lubricate cable end with lithium-
soap-based grease.
√
√
√
√
√
NO.
ITEM
CHECK OR MAINTENANCE JOB
ODOMETER READING (whichever comes first)
ANNUAL
CHECK
1000 km
or
2 months
4000 km
or
6 months
8000 km
or
10 months
12000 km
or
14 months
16000 km
or
18 months
UBE2EYE0.book Page 6 Monday, July 17, 2017 2:03 PM
