32
Periodic maintenance
9.
Install the foam element onto the air filter.
TIP
Be sure the foam element sealing surface matches the
air filter so there is no air leak.
10.
Install the air filter assembly and then tighten the
wing nut.
11.
Install the air filter case cover and then tighten the
air filter case cover nut.
Spark arrester
(For MX175/MX200)
1.
Remove the muffler cover bolts and then remove
the muffler cover.
2.
Loosen the muffler cap bolt and then remove the
muffler cap and muffler screen.
The engine should never run without the air filter
assembly; excessive piston and cylinder wear may
result.
NOTICE
The engine and muffler will be very hot after the
engine has been run.
Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing
during inspection or repair.
WARNING
1
2
1
1. Muffler cover bolt
2. Muffler cover
1
2
3
1. Muffler cap bolt
2. Muffler cap
3. Muffler screen
7VE-F8199-72-E0.book 32 ページ 2018年6月13日 水曜日 午後3時15分
Downloaded from