MX49/MX61 Reference Manual
Creating a Song with a
computer
11
Effect Block
This block applies effects to the output of the tone generator block, processing and enhancing the sound. Effects are
applied in the final stages of editing, letting you change the sound as desired.
Effect structure
Insertion Effects
Insertion Effects can be applied individually to Voices assigned to specific Parts before merging the signals of all Parts.
It should be used for sounds for which you want to drastically change the character. Each Voice features one Insertion
Effect. You can set different Effect types to the Insertion Effect. This setting can be set in the Voice Insert Eff/ DrumKit
Insert Eff display (
) of Voice Edit. This instrument features four Insertion Effects, which can be applied to four
Parts (maximum) of the Performance.
System Effects
This instrument is equipped with Reverb and Chorus as System Effects. System Effects are applied to the overall sound.
With System Effects, the sound of each Part is sent to the effect according to the Effect Send Level for each Part. The
processed sound (referred to as “wet”) is sent back to the mixer, and output—after being mixed with the unprocessed
“dry” sound.
Master EQ
Master EQ is applied to the final (post-effect), overall sound of the instrument. In this EQ, all five bands can be set to
peaking, with shelving being available also for the lowest and highest bands.
