MX49 MX61 MX88 Reference Manual
Creating a Song with a
computer
21
Audio channels
The audio signals of the instrument can be output to the USB [TO HOST] terminal and the OUTPUT [L/MONO]/[R]
jacks. When connecting to a computer, use the USB [TO HOST] terminal. In this case, up to two audio channels
(USB 1 and USB2) are available. The audio signals of the instrument can be input from the USB [TO HOST]
terminal and the [AUX IN] jack. Up to two channels of audio can be input to the USB [TO HOST] terminal. Set the
output level by setting the “DAW Level” parameter (
) on the instrument. The signals are output to the
OUTPUT [L/MONO]/[R] jack. Also, up to two audio channels can be input to the [AUX IN] jacks. The signal is sent
to directly the OUTPUT [L/MONO]/[R] jack. For more details, see the “MIDI/Audio Signal Flow” section (
).
