103
11
Buzzer sound
This function is for sounding a buzzer when the power is turned on, or when an error such as
disengaged clutches occurs.
Setting 1
............ The buzzer sound is enabled. (Default setting)
Setting 2
............ The buzzer does not sound when the power is turned on, the maximum speed
is adjusted, the controller is operated with the clutch levers in the manual
position, etc.
It is impossible to disable the horn and alert sounds.
LCD brightness
This function sets the brightness of the LCD of the controller.
Setting 1
............ Normal brightness setting (Default setting)
Setting 2
............
Slightly darker setting
Setting 3
............ Dark setting
Electromagnetic brake operation timing selection
This function adjusts the time until the electromagnetic brake is applied after the wheelchair
stops.
Setting 1
............
The electromagnetic brake is applied 10 seconds after the wheelchair stops.
(Default setting)
Setting 2
............ The electromagnetic brake is applied immediately after the wheelchair stops.
(2) Driving Parameters
You can adjust settings such as speed, acceleration, and joystick sensitivity.
Preset mode
Select from 3 preset modes.
Setting 1
............
Soft mode
Setting 2
............ Normal mode (Default setting)
Setting 3
............
Sports mode
Free mode
You can make fine adjustments to settings, such as speed, acceleration, joystick sensitivity, and
joystick input direction switching.
WARNING
● When evaluating the need to change parameter settings and choosing the actual changes,
consult the guidance of experts, such as physical therapists and occupational therapists,
and have your dealer make the changes.
Summary of Contents for NAVIGO
Page 28: ...1 22 1 6 Warning Label Location Diagram Power Unit and Controller NAVIGO 16 FRONT BACK ...
Page 29: ...1 23 NAVIGO 24 FRONT BACK ...
Page 30: ...1 24 Lithium Ion Battery Nickel Metal Hydride Battery Back side ...
Page 31: ...1 25 Charger for Lithium Ion and Nickel Metal Hydride Battery ESC3 ...