background image

11

Specifications

Frequency characteristics

The following graph displays the frequency 
characteristics of the SW-P270 subwoofer. 

The following graph displays the frequency 
characteristics of the SW-P270 subwoofer 
combined with NX-E270 speakers.

NX-E270/NX-C270

Type

.........Full-range acoustic-suspension speaker

system, Magnetically shielded type

Driver 

<NX-E270> .....................8 cm (8-5/32”)  

1.9 cm (3/4”) balanced-dome tweeter

<NX-C270> ..............................5 cm (2") full-range 

cone speaker x 2

Nominal Input Power

..................................... 30 W

Maximum Input Power

<NX-E270> .................................................  80 W

<NX-C270> ................................................ 100 W

Impedance

........................................................ 6 

Frequency Response

<NX-E270> ................ 100 Hz – 25 kHz (–10 dB)

<NX-C270> .................130 Hz – 20 kHz (–10 dB)

Sensitivity

<NX-E270> .................................  85 dB/2.83 Vm

<NX-C270> .................................. 85 dB/2.83 Vm

Dimensions (W x H x D)

<NX-E270> ........... 105 mm x 151 mm x 113 mm

(4-1/8” x 5-15/16” x 4-7/16”)

<NX-C270> ..............300 mm x 72 mm x 113 mm

(11-13/16” x 2-27/32” x 4-7/16”)

Weight

<NX-E270> ................................................ 0.8 kg 
<NX-C270> ................................................ 0.9 kg

SW-P270

Type

... Advanced YAMAHA Active Servo Technology

Magnetically shielded type

Driver

.........................16 cm (6-5/16") cone woofer

Output Power

......... 50 W (100 Hz, 5 

 at THD=10%)

Dynamic Power

....................................... 100 W, 5 

Input Impedance

... INPUT (1P RCA pin jack): 12 k

Frequency Response

................... 30 Hz – 200 Hz

Input Sensitivity

............ INPUT (1P RCA pin jack): 

100 mV (100 Hz, 5 

 at 50 W)

Power Supply

[U.S.A. and Canada models] ......AC 120 V, 60 Hz

[Australia model].........................AC 240 V, 50 Hz

[U.K. and Europe models]...........AC 230 V, 50 Hz

[China, Korea, Asia and General models]

........................ AC 110-120/220-240 V, 50/60 Hz

Dimensions (W x H x D)

.............................. 200 mm x 365 mm x 370 mm

(7-7/8” x 143-23/32” x 14-9/16”)

Weight

.......................................... 8.5 kg (18.7 lbs.)

Specifications are subject to change without notice.

20

50

100

200

500 Hz

40

50

60

70

80

90

100 dB

20

50

100

200

500 Hz

40

50

60

70

80

90

100 dB

SW-P270

NX-E270

VOLUME

00_NS-P270/276_UB.book  Page 11  Friday, December 2, 2005  4:36 PM

Summary of Contents for NS-P270

















Reviews: