background image

 

i

 

IMPORTANT SAFETY INSTRUCTIONS

 

Explanation of graphic symbols:

The lightning flash with arrowhead 
symbol within an equilateral triangle is 
intended to alert you to the presence of 
uninsulated “dangerous voltage” within 
the product’s enclosure that may be of 
sufficient magnitude to constitute a risk 
of electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to alert 
you to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

 

1

 

Read these instructions.

 

2

 

Retain these instructions.

 

3

 

Heed all warnings.

 

4

 

Follow all instructions.

 

5

 

Do not use this apparatus near water.

 

6

 

Clean only with a dry cloth.

 

7

 

Do not block ventilation openings. Install in accordance 
with the manufacturer’s instructions.

 

8

 

Do not install near heat sources such as radiators, 
heat registers, stoves, or other heat-producing 
apparatus (including amplifiers).

 

9

 

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades, 
one wider than the other. A grounding type plug has 
two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician to replace the obsolete outlet.

 

10

 

Protect the power cord from being walked on or 
pinched, particularly at plugs, convenience 
receptacles, or the point at which the power cord exits 
the apparatus.

 

11

 

Use only attachments/accessories specified by the 
manufacturer.

 

12

 

Use only with a cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the cart/ 
apparatus combination to avoid injury 
from tip-over.

 

13

 

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

 

14

 

Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as if the power supply cord 
or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate 
normally, or has been dropped.

 

 

Be sure to allow a space of at least 20 cm above, 
behind and on both sides of SW-P270.

 

 

Do not place the following objects on SW-P270:
A vessel containing liquid.
If the vessel falls due to vibration and the liquid spills, 
the unit may be damaged, and/or you may receive an 
electric shock.

 

IMPORTANT

 

Please record the serial number of this system in the 
space below.

Model:

Serial No.:

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future 
reference.

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK). NO USER-SERVICEABLE PARTS 

INSIDE. REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

 

00_NS-P270/276_UB.book  Page i  Friday, December 2, 2005  4:36 PM

Summary of Contents for NS-P270

















Reviews: