NS-P270/NS-P276
NS-P270
NS-P276
7
NS-P270
NS-P276
1. Removal of Front Grille Ass’y
The Front Grille Ass’y is fixed to the cabinet with
dowels at 6 locations. As a flatblade screwdriver is
used for removal, use special care not to cause
damage to the cabinet Ass’y.
a. Using the flatblade screwdriver inserted in the gap
between the Front Grille Ass’y and the cabinet
Ass’y (bottom side first), push up the Front Grille
Ass’y (Fig.1).
b. Remove the Front Grille Ass’y by lifting a
metalblade up (Fig.1).
*
When installing the Front Grille Ass’y, apply quick-
drying bond to the dowels and then fit them into dowel
holes for secure installation. (The Front Grille Ass’y
will come off easily if its dowels are fitted into dowel
holes only.)
2. Removal of Rear Panel Ass’y
Remove 14 screws (
1
) (Fig.2).
*
Arrow marks ( ) are printed to identify the screws to
be removed.
*
When assembling the Rear Panel Ass’y, check to
ensure that the packing is not damaged so as to
prevent air leakage from occurring.
■
SW-P270 DISASSEMBLY PROCEDURES
(Remove parts in disassembly order as numbered.)
Disconnect the power cable from the AC outlet.
Front Grill Ass’y
Cabinet Ass’y
1
Rear Panel Ass’y
Metal blade
Flatblade
screwdriver
Fig.1
Fig.2
