6
En
Example: Connecting two subwoofers
Connecting to the INPUT3 (LFE) terminal
If your amplifier (or receiver) can cut off high frequencies from signals sent to the subwoofer, connect the
amplifier to the subwoofer’s INPUT3 (LFE) terminal.
This will promote higher sound quality because the signal routing in the subwoofer is shortened by bypassing
the built-in HIGH CUT circuit.
1
1
Mono pin cable
1
Subwoofer
Subwoofer
Amplifier or
receiver
NS-SW300
1
Mono pin cable
1
1
Subwoofer
Subwoofer
Amplifier or
receiver
NS-SW200
NS-SW300
NS-SW200