background image

4

En

1

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future 
reference.

2

Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, 
heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following 
minimum clearances.
Top: 5 cm (2 in), Rear: 5 cm (2 in), Sides: 5 cm (2 in)

3

Locate this unit away from other electrical appliances, motors, or transformers to avoid humming 
sounds.

4

Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit 
in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation 
inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal 
injury.

5

Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be 
exposed to liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal 

injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the 

user and/or damage to this unit.

6

Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat 
radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or 
personal injury.

7

Do not plug in this unit to a wall outlet until all connections are complete.

8

Do not operate this unit upside-down. It may overheat, possibly causing damage.

9

Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than 

specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will 
not be held responsible for any damage resulting from use of this unit with a voltage other than 
specified.

13 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a 

wall outlet or this unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any 

service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power 

plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section of the Owner’s Manual on the CD-ROM for 

common operating errors before concluding that this unit is faulty.

17

Before moving this unit, press 

A

 to set it to standby mode and disconnect the AC power plug from the wall 

outlet.

18 Condensation will form when the surrounding temperature changes suddenly. Disconnect the 

power cable from the outlet, then leave this unit alone.

19 When using this unit for a long time, this unit may become warm. Turn the power off, then leave 

this unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When you 

dispose of batteries, follow your regional regulations.

22 Excessive sound pressure from earphones and headphones can cause hearing loss.
23 Keep the product out of reach of children to avoid them swallowing small parts.
24 Do not put a hand or foreign object into the port on the subwoofer.
25 When moving the subwoofer, do not hold the port, as it may cause personal injury and/or damage 

to this unit.

26 Do not place a fragile object near the port of the subwoofer. If the object falls as a result of the air 

pressure, it may cause personal injury and/or damage to the subwoofer and the object.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as it is connected to the wall 
outlet, even if this unit itself is turned off by 

A

. This state is called the standby mode. In this 

state, this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT 
TO RAIN OR MOISTURE.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or 
defibrillator implant.

Radio waves may affect electro-medical devices.
Do not use this unit near medical devices or inside medical facilities.

The name plate for YSP-CU2700 is located on the bottom of the unit.

Caution

Do not touch the surface marked with this label.
The surface may become hot during operation.

We, Yamaha Music Europe GmbH hereby declare that this unit is in compliance with the 
essential requirements and other relevant provisions of Directive 1999/5/EC.

Yamaha Music Europe GmbH 

Siemensstr. 22-34 25462 Rellingen, Germany
Tel: +49-4101-303-0

Summary of Contents for NS-WSW121





















Reviews: