NETWORKS
➤
Connecting to a network
En
30
Using connection methods other than the
MusicCast CONTROLLER app (wireless
network)
Use the setup menu on the unit to connect to a wireless network
without using the MusicCast CONTROLLER app.
• Sharing the iOS device setting (p. 30)
• Using the WPS push button configuration (p. 31)
• Searching for a wireless router (access point) (p. 32)
• Setting up the wireless connection manually (p. 34)
• Using the WPS PIN code (p. 36)
NOTE
• Once the unit has been connected to a wireless network using any of the methods
described above, network settings will change when connection to a wireless
network is established with the MusicCast CONTROLLER app.
• AirPlay is the only network function that can be used without the MusicCast
CONTROLLER app.
Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (such as an
iPhone).
Before proceeding, confirm that your iOS device is connected to a
wireless router (access point).
NOTE
• You need iOS device with iOS 7 or later.
• The connection settings on iOS devices cannot be applied to the unit to establish
a wireless connection if your wireless router (access point) uses WEP encryption.
See “Searching for a wireless router (access point)” (p. 32) to establish a
connection.
1
Press the
z
key to turn on this unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
3
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
Use the
S
/
T
keys to select “Network”, and press
the ENTER key.
5
Use the
S
/
T
keys to select “Network Connection”,
and press the ENTER key.
6
Use the
S
/
T
keys to select “Wireless (Wi-Fi)”, and
press the ENTER key.
7
Use the
S
/
T
keys to select “Share Wi-Fi Settings”,
and press the ENTER key.
8
When the following screen is displayed, press the
ENTER key.
HINT
• The settings to be deleted (initialized) will be displayed. If you do not want to
delete these settings, press the RETURN key to terminate the connection.
SETUP
RETURN
/
ENTER
