3
En
English
Eng
lis
h
Fr
a
nç
a
is
D
e
uts
c
h
Sv
en
sk
a
Ita
li
an
o
E
s
p
añ
ol
N
e
derl
ands
If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot
resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service
center.
Type ......................Advanced Yamaha Active Servo Technology
Driver ...............................................................16 cm cone woofer
non-magnetic shielding type
Output power .............................75 W (100 Hz, 5
Ω
, 10% T.H.D)
Dynamic power....................................................................130 W
Frequency response................................................. 30 Hz–200 Hz
Wireless
Frequency................................................................... 2.4 GHz
Transmission Range...... Approx. 20 m (without interference)
Power supply
[U.S.A. and Canada models] ...................... AC 120 V, 60 Hz
[Taiwan model]................................... AC 110–120 V, 60 Hz
[Australia model] ........................................ AC 240 V, 50 Hz
[U.K., Europe and Russia models] ............. AC 230 V, 50 Hz
[China model] ............................................. AC 220 V, 50 Hz
[Korea model] ............................................. AC 220 V, 60 Hz
[Asia model] .................................. AC 220–240 V, 50/60 Hz
Power comsumption ..............................................................70 W
Dimensions (W x H x D)
Upright positioning ................................145 × 446 × 371 mm
Positioned on side ..................................435 × 146 × 371 mm
Weight.................................................................................. 9.0 kg
Specifications are subject to change without notice.
Troubleshooting
Problem
Cause
Remedy
No sound from the
subwoofer.
The subwoofer is not connected wirelessly.
Make sure the power cable is connected properly.
Check if the LINK indicator lights on the rear of the subwoofer
(
p. 2).
When the indicator does not light, check that devices to be
connected wirelessly are assigned the same group ID.
The volume of the subwoofer is low.
Increase the volume of the subwoofer with the volume control for
subwoofer on the connected device wirelessly.
The subwoofer is too
quiet.
The source material doesn’t contain much
bass.
Try playing source material that contains more bass.
Reposition the subwoofer (
Specifications
Summary of Contents for NS-WSW160
Page 35: ...Printed in Indonesia ZF92240...
