Yamaha NS-WSW160, User Manual

3 

En

English

Eng

lis
h

Fr
a

nç
a

is

D

e

uts

c

h

Sv
en
sk
a

Ita
li

an
o

E

s

p

añ
ol

N

e

derl

ands

If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot 
resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service 
center.

Type  ......................Advanced Yamaha Active Servo Technology
Driver ...............................................................16 cm cone woofer

non-magnetic shielding type

Output power .............................75 W (100 Hz, 5 

Ω

, 10% T.H.D)

Dynamic power....................................................................130 W
Frequency response................................................. 30 Hz–200 Hz
Wireless

Frequency................................................................... 2.4 GHz
Transmission Range...... Approx. 20 m (without interference)

Power supply

[U.S.A. and Canada models] ...................... AC 120 V, 60 Hz
[Taiwan model]................................... AC 110–120 V, 60 Hz
[Australia model] ........................................ AC 240 V, 50 Hz
[U.K., Europe and Russia models] ............. AC 230 V, 50 Hz
[China model] ............................................. AC 220 V, 50 Hz
[Korea model] ............................................. AC 220 V, 60 Hz
[Asia model] .................................. AC 220–240 V, 50/60 Hz

Power comsumption ..............................................................70 W
Dimensions (W x H x D) 

Upright positioning ................................145 × 446 × 371 mm
Positioned on side ..................................435 × 146 × 371 mm

Weight.................................................................................. 9.0 kg
Specifications are subject to change without notice.

Troubleshooting

Problem

Cause

Remedy

No sound from the 
subwoofer.

The subwoofer is not connected wirelessly.

Make sure the power cable is connected properly.

Check if the LINK indicator lights on the rear of the subwoofer 
(

☞

p. 2).

When the indicator does not light, check that devices to be 
connected wirelessly are assigned the same group ID.

The volume of the subwoofer is low.

Increase the volume of the subwoofer with the volume control for 
subwoofer on the connected device wirelessly.

The subwoofer is too 
quiet.

The source material doesn’t contain much 
bass.

Try playing source material that contains more bass.

Reposition the subwoofer (

☞

p. 1).

Specifications