background image

P.O.Box 1, Hamamatsu, Japan

NX-A01

TROUBLESHOOTING .................................................... 6
IC DATA ................................................................... 7–10
BLOCK DIAGRAM ....................................................... 11
PRINTED CIRCUIT BOARDS ................................ 12–13
PIN CONNECTION DIAGRAMS .................................. 14
SCHEMATIC DIAGRAMS ...................................... 15–16
REPLACEMENT PARTS LIST .............................. 17–21

1 0 1 0 2 9

 CONTENTS

TO SERVICE PERSONNEL .......................................... 2
FRONT PANELS ............................................................ 3
REAR PANELS .............................................................. 3
SPECIFICATIONS .......................................................... 3
INTERNAL VIEW ........................................................... 4
About the Status Indicator (LED) ................................ 4
DISASSEMBLY PROCEDURES ............................... 4–5

SERVICE MANUAL

SPEAKER SYSTEM

NX-A01

 '06.08

 2006                                         All rights reserved.

This manual is copyrighted by YAMAHA and may not be copied or

redistributed either in print or electronically without permission.

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are
already known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components, and failure of the product to perform as specified.  For
these reasons, we advise all YAMAHA product owners that any service required should be performed by
an authorized YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization, certifica-
tion or recognition of any applicable technical capabilities, or establish a principle-agent relationship of
any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering,
and service departments of YAMAHA are continually striving to improve YAMAHA products.  Modifications are, therefore,
inevitable and specifications are subject to change without notice or obligation to retrofit.  Should any discrepancy appear to
exist, please contact the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components.  Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this
buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement.  Recheck all work before you apply power to
the unit.

Summary of Contents for NX-A01 - Speaker Sys























Reviews: